47556
15
Zoom out
Zoom in
Previous page
1/102
Next page
4-2
4. Selecting the Printer Settings
Item
1 Interface selection
Sets the interface that will be used for printing. The
currently selected interface will be highlighted. The printer
will automatically switch to the appropriate interface for
printing.
2 Parallel TX/RX mode
Sets the transmission and reception mode when the
printer is connected to your computer with a parallel
interface.
3 Baud rate
4 Data bit length
5 Stop bit length
6 Parity
7 Protocol
8 Barcode mode ON/OFF
9 NetWare ON/OFF
0 NetWare Frame Type
Sets the NetWare Frame type.
! TCP/IP ON/OFF
@ DHCP ON/OFF
# IP address
$ Subnet Mask
% Gateway address
^ Ether Talk ON/OFF
& Network Card Status Page print out
Prints out a Status page for the Network Card as well,
when the standard Status Page (page 4-1) or that for use
by your service representative (page 4-47) are printed out.
A more detailed Status Page will be printed out together
with the Service Representative Status Page print out.
Available settings
Parallel, Serial, Network
Auto, Normal, High Speed,
Nibble (high)
1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200
7, 8
1, 2
None, Odd, Even, Ignore
DTR(positive)&XON/XOFF,
DTR (positive), DTR (negative),
XON/XOFF, ETX/ACK
OFF, ON
OFF, ON
Auto, 802.3, Ethernet 2, 802.2,
802.3 SNAP
OFF, ON
OFF, ON
Enter the appropriate network
address.
Enter the appropriate network
address.
Enter the appropriate network
address.
OFF, ON
OFF, ON
Remarks
Displayed only when the Barcode
Reader is installed.
Displayed only when the NetWare
setting is turned ON.
4-2 Interface Settings
About the interface settings
It is possible to perform interface settings for the 17 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP35 Operation Guide Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP35 Operation Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info