46804
9
Zoom out
Zoom in
Previous page
1/21
Next page
4
If you are connecting the printer to your computer with a
parallel or serial cable, connect the other end of the printer
cable to the connector on your computer.
If you are connecting the printer to a network, connect the
other end of the printer cable to an appropriate hub.
Turn the main switch to the printer back ON ( | ).
2-1 Connecting the printer cable
CAUTION: ALWAYS turn the main switch to the printer OFF (O)
BEFORE connecting the printer cable.
Turn the main switch located on the left side of the printer
OFF (O). If you are connecting the printer to your computer
with a parallel or serial cable, turn the power off to your
computer as well.
Connect the printer cable to the interface connector located
at the back of the right side of the printer.
The following types of interface come standard with the
printer. Be sure to connect the printer cable to the interface
connector that is appropriate to your situation.
A Parallel interface connector
B Serial interface connector
C
Network interface connector (100BASE-TX or 10BASE-T)
* If you are going to use this machine as a network printer,
perform the appropriate network settings. (Refer to 2-3
Network (TCP/IP) settings on page 5.)
2-2 Installing the software
Perform the following procedure to install into your computer the
printer driver and other software that is appropriate to the operating
system in use in that computer. For information on installing the
required software, refer to the On-Line Manual that is located on the
CD-ROM that is included with this product.
1
2
3
4
2. Set-up
A
B
C
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP30C Printing System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP30C Printing System Set-up in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info