46807

Oce OP30C Printing System Functions Manual

86
Zoom out
Zoom in
Previous page
1/90
Next page
11-7
11. Printer Driver for Macintosh
■ Paper Destination:
Specifies the location of ejection for print jobs.
[Inner Tray] ................................. Copies will be ejected onto the Inner tray.
[Side Tray] .................................. Copies will be ejected into the side tray.
[Finisher (Face-Up)] .................. Copies will be ejected into the upper tray of the optional Finisher.
[Finisher (Face-Down)] ............. Copies will be ejected into the lower tray of the optional Finisher.
■ Staple:
It is possible to staple your copy sets if the optional Finisher is installed.
* The following settings are required before stapling is possible:
(1) Change the “Installable Options” setting in step 10 on page 11-3 to the following.
Select “Finisher” under “Output Device”.
(2) Change the “Printer Specific Options” setting on page 11-6 to the following.
Select “Finisher (Face-Down)” under “Paper Destination”.
■ Punch:
When the optional Finisher is equipped with a Punch Unit, it is possible to have holes punched into the finished copies.
* In order to use the Hole Punch function, it is first necessary to perform the following settings.
(1) Change the “Installable Options” setting in step 10 on page 11-3 to the following.
Select “Finisher” under “Output Device”.
(2) Change the “Printer Specific Options” setting on page 11-6 to the following.
Select “Finisher (Face-Down)” or “Finisher (Face-Up)” under “Paper Destination”.
■ Management Code:
This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list
here and that selected in the printer itself do not match, printing will not be possible.
■ 180 Rotate:
Selecting this option prints upside down.
■ Barcode:
If “Temporary Job” or “Permanent Job” is selected under “Job Storage”, you can select here whether or not to have a barcode printed onto
the printed pages. This barcode can be read using the optional Barcode Reader in order to print out the corresponding data that is stored
in the printer.
[First Page Only]........................The barcode will be only printed onto the first page.
[All Pages] .................................. The barcode will be printed onto all printed pages.
[Do not print Barcode] .............. The barcode will be not be printed at all.
■ Barcode ID:
Select “On” if you want to have the barcode ID printed.
■ Barcode Position:
Designates the location on the page where the barcode will be printed. It is possible for you to select both the location (from among “Upper
Left”, “Upper Right”, “Lower Left” and “Lower Right”) and the orientation of the barcode on the page.
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP30C Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP30C Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info