Manual Oce OP30C 3000 sheet finisher (page 21 of 27) (English)

46816

Zoom out

Zoom in

1/27

Clearing a Staple Jam

1. Grasp the front cover handle and open the

front cover towards you.

2. Grasp the internal tray handle and carefully

pull the internal tray out towards you.

3. Grasp the Stapling Unit handle and lift up

the Stapling Unit. The two staplers will

become visible.

* There is one stapler located toward the front

of the machine and one located towards the

rear. Staple jams need to be cleared from

each stapler separately. The procedure for

clearing staple jams is the same for both

staplers.

4. Pinch the staple holder release lever as

shown in the illustration and lower it to

release the lock.

5. Pull out the staple holder.

6. Push up on the tab A on the protective

faceplate in order to raise the faceplate.

7. Remove the jammed staple from the tip of

the staple cartridge (the end where staples

are set).

8. Lower the protective faceplate back into its

original position.

9. Replace the staple holder back in its

original position in the Stapling Unit. Once

it has been fully inserted, it will click into

place.

10. Repeat steps 4 - 9 to check the other

stapler and remove any jammed staples

from that stapler as well.

11. Lift up the Stapling Unit slightly and then

lower it into its original position.

12. Replace the internal tray in its original

position all the way into the Finisher.

13. Close the front cover securely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP30C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP30C 3000 sheet finisher Manual

Product: