Manual Oce OP30C 3000 sheet finisher (page 18 of 27) (English)

46816

Zoom out

Zoom in

1/27

Copying in the Interrupt Copy Mode

1. Select the Interrupt copy mode on the

operation panel of your copier and perform

the appropriate procedure to start copying.

* Refer to the Instruction Handbook of your

copier for more detailed information on

the Interrupt copy mode.

* If the present copy job is being ejected onto

the Sort tray, the copies made in the

Interrupt copy mode will be ejected on the

Non-sort tray. If the present copy job is being

ejected onto the Non-sort tray, the new

copies will be ejected on the Sort tray.

2. Replace the present original(s) with the

one(s) to be copied.

3. Select the desired paper size and number

of copies to made, etc.

4. Press the Print key. Copying will begin and

the finished copies will be ejected onto the

Sort tray or Non-sort tray.

5. After Interrupt copying is completed,

perform the required operation on your

copier to release the Interrupt copy mode.

6. Reset the previous original(s) and press the

Print key. The copy job that was interrupted

will then resume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP30C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP30C 3000 sheet finisher Manual

Product: