46816

Oce OP30C 3000 sheet finisher Manual

11
Zoom out
Zoom in
Previous page
1/27
Next page
Operation
Copying in the Sort Mode
1. Select the Sort mode on the operation
panel of your copier.
* Refer to the Instruction Handbook of your
copier for more detailed information on
selecting the desired copy mode.
* Acceptable copy paper sizes:
A3, B4, A4, A4R (11" x 17", 81/2" x 14",
11" x 81/2", 81/2" x 11")
2. Set the originals to be copied in the
Document Feeder.
* If the number of originals exceeds the
acceptable limit for the Document Feeder,
use the Job Build function of your copier
to sort your copies. (Refer to page 28.)
* Refer to the Instruction Handbook for your
copier for more detailed information on
the acceptable number of originals that
can be set in the Document Feeder.
* When setting an original on the platen, a
message will appear after each original is
scanned to confirm whether you want to
scan another original or not. Refer to the
Instruction Handbook of your copier for
further details.
3. Select the desired copy exposure, etc., and
perform the appropriate procedure to start
copying.
* Finished copies will be ejected face down
onto the Sort tray with each full set shifted
slightly from the previous one. The Sort tray
will automatically lower as the number of
copies increases.
* If the Sort tray reaches its maximum
acceptable capacity, a message will be
displayed on the copier. In this case, remove
all copies from the Sort tray.
* The maximum number of copies that can be
stored on the Sort tray will differ depending
on the size of copy paper that is being used.
Refer to page 71.
4. Remove all of the finished copies from the
Sort tray.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP30C 3000 sheet finisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP30C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info