47540
12
Zoom out
Zoom in
Previous page
1/20
Next page
6
2. Set-up
Use the and cursor keys to select TCP/IP and
then touch the Change key.
Select ON under the TCP/IP setting and OFF under the
DHCP setting.
Use the and cursor keys to select IP Address and
then touch the Change key.
Use the numeric keys to input the address. Input the first
block of 3 digits of the address in the highlighted area.
Press the sharp (#) key to set the address after inputting
each block of 3 digits.
To use the printer as a network printer, it is necessary to set an IP
address for the printer.
Notes
The IP address that should be registered here will differ depending
upon your network environment. Check with your network
administrator BEFORE performing this setting.
If you are using a DHCP server to automatically configure the IP
address, this setting will not be necessary because DHCP server
configuration is already enabled as the factory default setting.
* To cancel the setting midway through it, press the Stop/Clear key.
Press the Printer key. The printer will switch to the printer
mode.
Touch the Printer Menu key.
Touch the Interface key.
Touch the Network key and then the Detail key.
1
2
3
4
5
6
7
8
2-4 Network (TCP/IP) settings
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP25 Operation Guide Printing System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP25 Operation Guide Printing System Set-up in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info