47528
17
Zoom out
Zoom in
Previous page
1/22
Next page
12
3. Troubleshooting
Error code
(15 ppm copier)
E80
E82
E83
EF1
Display message
(20 ppm
copier
)
Print overrun
Memory overflow
Interface occupied
checksum error
Procedure
<15 ppm
copier
>
A data overrun error has occurred due to insufficient memory.
If you want to force-continue the print job, press the Start key. If you want to
cancel the printing operation completely, press the Stop/Clear key.
If Auto Continue (menu: P74) is turned On (setting: 1), the printing operation
will be restarted automatically after the amount of time specified there.
Once this error message is displayed, Page Protect (menu: P42) will be turned
On (setting: 1) automatically.
<20 ppm
copier
>
A data overrun error has occurred due to insufficient memory.
If you want to force-continue the print job, first press the Printer key to switch to
the printer mode. Next, select the GO command and then press the Enter key. If
you want to cancel the printing operation completely, first press the Printer key to
switch to the printer mode. Next, select the CANCEL command and then press
the Enter key.
If Auto Continue is turned On, the printing operation will be restarted
automatically after the amount of time specified there.
Once this error message is displayed, Page Protect will be turned On
automatically.
<15 ppm
copier
>
The current print job could not be completed due to insufficient memory in the
printer.
If you are using a RAM disk, reduce the size of the RAM disk. If this error occurs
often, it is recommended that you install additional memory into the printer. For
more detailed information on adding memory, contact your service representative
or an authorized service center.
If you want to force-continue the print job, press the Start key. The data that has
already been processed will be printed out and the remaining portion of the print
job will be printed onto the following page.
If Auto Continue (menu: P74) is turned On (setting: 1), the printing operation
will be restarted automatically after the amount of time specified there.
<20 ppm
copier
>
The current print job could not be completed due to insufficient memory in the
printer.
If you are using a RAM disk, reduce the size of the RAM disk. If this error occurs
often, it is recommended that you install additional memory into the printer. For
more detailed information on adding memory, contact your service representative
or an authorized service center.
If you want to force-continue the print job, first press the Printer key to switch to
the printer mode. Next, select the GO command and then press the Enter key.
The data that has already been processed will be printed out and the remaining
portion of the print job will be printed onto the following page.
If Auto Continue is turned On, the printing operation will be restarted
automatically after the amount of time specified there.
The selected interface is currently in use. Wait for a while and then attempt the
operation again.
An error has been detected during operation. Turn the main switch to the printer
OFF (O) and then back ON ( | ) again. If the same error message remains, contact
your service representative or an authorized service center.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP20 Operations Guide Printing System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP20 Operations Guide Printing System Set-up in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info