47525

Oce OP20 Operations Guide Printing System Functions Manual

23
Zoom out
Zoom in
Previous page
1/87
Next page
2-12
2. Printer Settings (20 ppm copier)
Item No.
55
56
57
58
59
60
Item
Receive dump mode
The data that the printer receives for
debugging programs and files is turned into
hexadecimal code and printed out. If “OK” is
selected here, this receive dump mode will
be activated. The receive dump mode will be
canceled under the following circumstances:
• Form feed is initiated (by selecting the
“GO” command in the printer mode and
then pressing the Enter key).
• A force-print time-out occurs.
Printer reset
Resets the Printer Board only even without
turning the power to the machine OFF.
Resource protect mode
Protects the resource data of fonts and
macros downloaded through PCL6 and,
even if the emulation protocol is switched,
the PCL resource will be saved in the
printer’s memory. If “Permanent” is selected
here, temporary resources will not be saved.
If, however, “Per/Temp” is selected,
temporary resources will also be saved.
Auto Continue ON/OFF
If one of the following error messages
appears and “On” has been selected here,
the error state will be released and the
printing operation will be restarted
automatically after a specified amount of
time.
“Memory overflow”
“Print overrun”
Recovery time for Auto Continue
Sets the amount of time before Auto
Continue engages when “On” is selected
under the “Auto Continue ON/OFF” setting
(item No.: 58). If “000” seconds is selected
here, Auto Continue will engage immediately
after the error.
Service Rep Status Page print out
Prints out a Status Page for use by your
service representative.
Display message
Print HEX-DUMP
Printer Reset
Resource pro.
Auto Continue
Change #
Print Status page
Available settings
OK
OK
Off, Permanent,
Per/Temp
On, Off
000 - 495 (sec.)
No, Print
Remarks
At least 16 MB of additional
memory (option) must be installed.
Displayed only when “On” is
selected under the “Auto Continue
ON/OFF” setting (item No.: 58).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP20 Operations Guide Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP20 Operations Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info