47516

Oce OP15 Operations Guide Printing System Functions Manual

83
Zoom out
Zoom in
Previous page
1/87
Next page
6-6
6. Printer Driver for Macintosh
6-5 Printer Specific Options
■ Resolution:
Specifies the printing resolution (number of dots per inch) to be used when printing. Select between “600 dpi” and “300 dpi”. The factory
default setting is “600 dpi”.
■ Management Code:
This setting is used when Copy Management is turned ON in the printer. If the Management code that you selected from the dropdown list
here and that selected in the printer itself do not match, printing will not be possible.
■ Smoothing:
Turning this setting “On” allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing
process.
■ PagePolicy:
Perform this setting in conjunction with the settings to be made under “Paper source” on page 6-4.
[Auto Size Select] ......................Select this setting when you want to select the source of paper feed according to the type of paper
(you are going to select “Auto Select” under “Paper source”).
[Cassette Base] .........................Select this setting when you want to select the source of paper feed according to the tray under
“Paper source”.
* If you are going to select “Auto Select” under “Paper source”, be sure to select “Auto Size Select” here or there is a possibility that
printing will be accomplished onto paper that is difference the expected.
■ Output Bin:
Specifies the location of ejection. Depending upon which option you have installed, you can select between the Job Separator and the
Finisher (only available in the 20 ppm copier).
[Inner Tray] .................................Copies will be ejected onto the Inner tray.
[Job Separator] .........................Copies will be ejected into the optional Job Separator.
[Finisher] ....................................Copies will be ejected into the optional Finisher. (Only available with 20 ppm copiers.)
* In order to set the location of ejection for the Job Separator or Finisher, it is necessary to first perform the setting for that optional
equipment under “Installable options” in step 9 on page 6-3.
* Paper sizes and types that are acceptable for use with the Job Separator are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330
mm), JIS B4 and JIS B5
Paper types: Plain, Letterhead, Recycled and Color
* Paper sizes, types and source of paper feed that are acceptable for use with the Finisher are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), A3, A4, Folio (210 mm x 330 mm), JIS B4 and JIS B5
Paper types: Plain, Letterhead, Recycled and Color
Source of paper feed: Any tray EXCEPT the Bypass Tray
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP15 Operations Guide Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP15 Operations Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info