47516
77
Zoom out
Zoom in
Previous page
1/87
Next page
5-9
5. Printer Driver for Windows2000
In order to view this window and make settings for optional equipment, select “Properties” in step 4 on page 5-1 and then click on the “Device
Settings” Tab.
Perform the settings here whenever you add optional equipment. The functions of the optional equipment will only be available to the printer
after you have completed the setting here. The optional equipment available for selection are as follows.
Optional Feeder
Perform this setting according to the installed Option Cassette.
Output Device
Perform this setting when the optional Job Separator or Finisher (only available with 20 ppm copiers) are installed.
Duplex Unit
Perform this setting when the optional Duplex Unit (only available with 20 ppm copiers) is installed.
Optional Disk (only available with KPDL2 Driver)
Perform this setting when you want to create a RAM disk. Refer to “Chapter 1, 3-2 RAM Disk” on page 3-1 for more detailed information
on creating a RAM disk.
* In order to create a RAM disk, it is necessary to increase the memory capacity of your printer. After increasing memory, perform the
setting here according to the “Memory” setting below.
Memory
Perform this setting according to the amount of memory in your printer. If a mistake is made in this setting, there is a possibility that printing
will not be accomplished properly.
5-5 Device Settings Tab
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP15 Operations Guide Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP15 Operations Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info