47516

Oce OP15 Operations Guide Printing System Functions Manual

45
Zoom out
Zoom in
Previous page
1/87
Next page
2-7
2. Windows XL Driver
2-6 Device Settings Tab
To access the Device Settings screen, in step 4 on page 2-1 select [Properties] from the menu and then click on the Device Settings Tab.
When you have added optional equipment, make the appropriate settings for that equipment here. Once the corresponding setting is com-
plete, the corresponding function of the installed option will be added to the printer.
Copy Management related setting are made here as well.
■ Device Options
Select and installed options here. Once you have completed the setting for each option, the functions of that option will be available for
use.
● Optional Paper Feeder
Perform this setting according to the installed Option Cassette.
● Duplex Unit
Perform this setting when the optional Duplex Unit (only available with 20 ppm copiers) is installed.
● Internal Finisher
Perform this setting when the optional Finisher (only available with 20 ppm copiers) is installed.
● Job Separator
Perform this setting when the optional Job Separator is installed.
● RAM Disk
Perform this setting when you want to create a RAM disk. Refer to “Chapter 1, 3-2 RAM Disk” on page 3-1 for more detailed information
on creating a RAM disk.
* In order to create a RAM disk, it is necessary to increase the memory capacity of your printer. After increasing memory, perform the
setting here according to the “Memory” setting below.
■ Memory
Specifies the amount of memory installed in the printer. If you make a mistake in the setting here, it is possible that printing will not be
accomplished properly.
■ RAM Disk
Specifies the amount of memory to be used for the RAM disk. This setting will only be available when you have selected “RAM Disk” in the
“Device Options” list.
■ User…
Click on this button when you want to register a user and/or department name. The [User Settings] dialog box will appear. It is also
possible to select the “GDI compatible mode” from that dialog box. Refer to “2-6-1 User Settings” on page 2-8 for more detailed informa-
tion.
■ Administrator…
Click on this button when Copy Management is Turned ON in the printer. The [Administrator Settings] dialog box will appear. Refer to “2-
6-2 Administrator Settings” on page 2-8 for more detailed information.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP15 Operations Guide Printing System Functions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP15 Operations Guide Printing System Functions in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info