47483
275
Zoom out
Zoom in
Previous page
1/288
Next page
Appendix
ADVANCED OPERATION GUIDE Appendix-5
Store paper in a cool, well-ventilated place.
Store paper flat and unopened in the package. Once the package is
opened, reseal it if the paper is not to be used for a while.
Store paper sealed in the original package and box. Put a pallet under
the carton to keep it raised above the floor. Especially during rainy
seasons keep the paper a sufficient distance away from wooden or
concrete floors.
Before using paper that has been stored, keep it at the proper
moisture level for at least 48 hours.
Do not store paper where it is exposed to heat, sunlight, or dampness.
Other Paper Specifications
Porosity: The density of the paper fibers
Stiffness: Paper must be stiff enough or it may buckle in the machine,
causing jams.
Curl: Most paper naturally tends to curl after the package is opened. When
paper passes through the fixing unit, it curls upward slightly. To deliver flat
printouts, load the paper so that the curl faces towards the bottom of the
paper tray.
Static electricity: During printing, paper is electrostatically charged so
that the toner adheres. Choose paper that can be discharged quickly so
that copies do not cling together.
Whiteness: Paper whiteness affects print contrast. Use whiter paper for
sharper, brighter copies.
Quality: Machine problems may occur if sheet sizes are not uniform or if
corners are not square, edges are rough, sheets are uncut, or edges or
corners are crushed. In order to prevent these problems, be especially
careful when you cut the paper yourself.
Packaging: Choose paper that is properly packaged and stacked in
boxes. Ideally, the packaging itself should have been treated with a coating
to inhibit moisture.
Specially treated paper: We do not recommend printing onto the
following types of paper, even if it conforms to the basic specifications.
When you use these kinds of paper, purchase a small amount first as a
sample to test.
Glossy paper
Watermarked paper
Paper with an uneven surface
Perforated paper
Special Paper
This section describes printing onto special paper and print media.
275


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1150 Advanced Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1150 Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 14,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info