Oce OP1040 Operations Guide Printing System Functions Manual
37
Zoom out
Zoom in
Previous page
1/68
Next page
4-24
4. Selecting the Printer Settings
Item
1RAM disk On/Off
2Writing data
If “Write Data” is selected here, the machine will enter a
“waiting for data” state until data is sent from the host
computer.
3Partition List print out
4RAM disk size
Sets the amount of memory that will be used as a RAM
disk. The maximum size that can be selected is the total
amount of memory installed minus the amount used by
the system (36 MB).
5Reading data
Reads the selected data from the RAM disk.
6Reading program data
Reads the selected program data from the RAM disk.
7Deleting data
Deletes the selected data from the RAM disk.
8Deleting font data
Deletes the selected font data from the RAM disk.
Available settings
On, Off
Write Data
List of Partitions
01 – 99 MBytes
Select from among the data parti-
tion names that are displayed.
Select from among the program
partition names that are
displayed.
Select from among the data parti-
tion names that are displayed.
Select from among the fonts that
are displayed.
Remarks
This setting must be turned On in
order to sort print sets using the
collating function.
Displayed only when “On” is selected
under the “1 RAM disk On/Off”
setting.
Displayed only when “On” is selected
under the “1 RAM disk On/Off”
setting.
Displayed only when “On” is selected
under the “1 RAM disk On/Off”
setting.
•Displayed only when there is
appropriate data in the RAM disk.
•Displayed only when “On” is
selected under the “1 RAM disk
On/Off” setting.
•Displayed only when there is
appropriate program data in the
RAM disk.
•Displayed only when “On” is
selected under the “1 RAM disk
On/Off” setting.
•Displayed only when there is
appropriate data in the RAM disk.
•Displayed only when “On” is
selected under the “1 RAM disk
On/Off” setting.
•Displayed only when there is
appropriate font data in the RAM
disk.
•Displayed only when “On” is
selected under the “1 RAM disk
On/Off” setting.
4-8RAM disk settings
RAM Disk
In this machine, it is possible to create a RAM Disk, or a portion of memory that is used as a virtual disk. By creating a RAM Disk of a desired size
from among the total memory in the printer, it is possible to perform electronic sorting (which shortens the overall time required for printing) as well
as to save data to and retrieve data from that disk very quickly.
The RAM disk function is not available when the optional hard disk is installed.
[Proof and Hold] and [Stored job print out] of the e-MPS function (P4-48) are available.
IMPORTANT!
The RAM Disk is created from that portion of the printer’s memory that is normally available to the user. Thus, if the size of the RAM disk created is
too large, printing speed may actually be decreased or the machine may run out of available memory.
WARNING: Resetting the printer or turning the main switch OFF will erase all data written to the RAM Disk.
The factory default setting for the RAM Disk is “Off” . In order to create a RAM Disk, make the necessary settings as shown below.
About the RAM disk settings
It is possible to perform RAM disk settings for the 10 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Oce OP1040 Operations Guide Printing System Functions at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Oce OP1040 Operations Guide Printing System Functions in the language / languages: English as an attachment in your email.
The manual is 5,84 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
