47387
16
Zoom out
Zoom in
Previous page
1/25
Next page
COMMAND CENTER
15
6 Advanced Page
This section includes advanced settings that apply to the entire device and is comprised
primarily of advanced network settings. Pages in this section are available only to the
Administrator (if the Admin password has been set).
Note
Always restart this machine after you have completed these settings in order to properly
register the content of those settings in the machine. Refer to Basic > Reset Page on
page 12.
6-1 Advanced > Protocols: TCP/IP: General
The table below provides a summary of the items displayed on the Printer System
page.
Item Description
Host Name Specifies a name for the printing system network component. This name is
also used as the NetBEUI Printer Name and the SNMP sysName object.
IP Address Assigns the Internet Protocol address on the printing system network
component. Format of the IP Address is four-byte (32-bit) numbers
separated by dots, e.g.
192.168.110.171.
Subnet Mask Specifies the subnet mask configured on the printing system network
component. If the printing system does not automatically assign a usable
default value and the first number in the IP address above is from 192 to
254, then use 255.255.255.0 as the subnet mask.
Default Gateway The IP address of the gateway router for the local network.
DHCP/BOOTP, RARP, ARP/PING Identifies how the machine obtains its IP configuration:
DHCP/BOOTP: automatic configuration via a BOOTP server or a DHCP
server.
RARP: automatic configuration via the Reverse Address Resolution
Protocol.
ARP/PING: automatic configuration via the Address Resolution Protocol or
PING.
DNS Server
(Primary, Secondary)
The IP address of the primary and secondary Domain Name System
(DNS) servers.
Rendezvous This product supports Apple Rendezvous. Printers can be added from the
Printer Center in Mac OS X. To allow printing, the printer should support
KPDL. This setting enables (On) or disables (Off) Rendezvous.
Rendezvous Name Specifies the name to use for Rendezvous.
Domain Name The Domain Name System (DNS) name of the domain which the printing
system belongs, such as
kyoceramita.com.
It should not include host
printer name.
WINS Server
(Primary, Secondary)
The IP address of the primary and secondary Windows Internet Name
Service (WINS) servers.
Scope ID This section determines the scope of IP addresses that a Windows server
can grant or lease to any requesting network component.
A DHCP server processes the printing system’s discovery broadcasts and
returns an IP address to it. The DHCP server may be set up to grant an IP
address for a limited time (a temporary lease) or for an unlimited time (an
unlimited lease), or it may be configured with a permanent address
reservation for the printing system.
FTP Status Check This selects whether to check the status of the FTP connection (On) or not
(Off).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1025 Operation Guide Command Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1025 Operation Guide Command Center in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info