47336

Oce OP1018 Advanced Operation Guide Manual

130
Zoom out
Zoom in
Previous page
1/148
Next page
Appendix-8 ADVANCED OPERATION GUIDE
Do not use envelopes that have an encapsulated liquid adhesive.
Avoid long printing runs consisting of envelopes only. Extensive envelope printing
can cause premature printer wear.
To avoid jamming due to curled envelopes, do not leave more than approximately 10
printed envelopes stacked in the paper trays during multiple envelope printing.
Thick Paper
Fan the stack of paper and align the edges before loading them in the MP tray. Some
types of paper have rough edges on the back (those are created when the paper is
cut). In this case, put the paper on a flat place and rub the edges once or twice with,
for example, a ruler to smooth them in the same way as described in Postcards on
page Appendix-7. Feeding rough edged paper may cause paper jams.
NOTE: If the paper jams even after you
smooth it out in such a way, set the paper in
the MP tray with the leading edge raised up
a few millimeters as shown in the
illustration.
Colored Paper
Colored paper should satisfy the same conditions as white bond paper, listed in
Paper Specifications on page Appendix-1. In addition, the pigments used in the
paper must be able to withstand the heat of fusing during the printing process (up to
200°C or 392°F).
Preprinted Paper
Preprinted paper should have a bond paper base. The preprinted ink must be able
to withstand the heat of fusing during the printing process, and must not be affected
by silicone oil.
Do not use paper with any kind of surface treatment, such as the media type
commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as the white bond paper
(refer to Paper Specifications on page Appendix-1.) except whiteness.
NOTE: Before purchasing recycled paper, test a sample on the machine and check
that the printing quality is satisfactory.
… 130 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1018 Advanced Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1018 Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info