Manual Oce OP1018 Advanced Operation Guide (page 127 of 148) (English)

47336

127

Zoom out

Zoom in

1/148

ADVANCED OPERATION GUIDE Appendix-5

Stiffness: Limp paper can buckle inside the machine, while paper that is too stiff may

bind. Either way the result is a paper jam.

Curl: Most paper has a natural tendency to curl in one direction. The paper should

be loaded so that the natural curl is downward, to counteract the upward curl

imparted by the machine. Printed sheets will then come out flat. Most paper also has

a top and bottom surface. Loading instructions are usually given on the paper

package.

NOTE: If the paper is considerably curled in one direction, e.g. when the paper was

used to print on one side, try to roll the paper in the opposite direction to counteract

the curl. Printed sheets will then come out flat.

Electrostatic properties: During the printing process the paper is electrostatically

charged to attract the toner. The paper must be able to release this charge so that

printed sheets do not cling together in the output tray.

Whiteness: The contrast of the printed page depends on the whiteness of the paper.

Whiter paper provides a sharper, brighter appearance.

Quality control: Uneven sheet size, corners that are not square, ragged edges,

welded (uncut) sheets, and crushed edges and corners can cause the machine to

malfunction in various ways. A quality paper supplier should take considerable care

to ensure that these problems do not occur.

Packaging: Paper should be packed in a sturdy carton to protect it from damage

during transport. Quality paper obtained from a reputable supplier is usually properly

packaged.

Special Paper

The following types of special paper can be used:

• Transparency (overhead projection film)

• Adhesive-backed label paper

• Envelopes

• Colored paper

• Preprinted paper

• Recycled paper

Use paper that is sold specifically for use with copiers (heat-fusing type).

Transparency, label paper, and envelopes should not be placed in the paper

cassette; they must be fed from the MP tray and delivered in the face up stack.

Since the composition and quality of special paper vary considerably, special paper

is more likely than white bond paper to give trouble during printing. No liability will be

assumed if moisture and so forth given off during printing on special paper causes

harm to the machine or operator.

NOTE: Before purchasing any type of special paper, test a sample on the machine

and check that printing quality is satisfactory.

Specifications for each type of special paper follow.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1018 Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP1018 Advanced Operation Guide Manual

Product: