47333
20
Zoom out
Zoom in
Previous page
1/32
Next page
1.1.1.
Océ OP1016/1020/1025
Scan System setup
Operations Guide
Education Services
Océ
Operations Guide
English version
This Operation Guide mentions that 1650 is a 16 ppm (prints per minute) machine and 2050 is a
20 ppm (prints per minute) machine.
Note This Operation Guide contains information that corresponds to using both the inch and metric
versions of this machine.
This Operation Guide shows messages of the inch version. When using the metric version, see
the messages of the inch version for reference. With regard to the messages in the text, if a
message has only the difference of upper- and lower-case spelling, we show only the message
of the inch version. When there is even a slight difference in the message, we have listed the
information for the inch version followed, in brackets, by the corresponding information for the
metric version.
i
Trademark Information
Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of
Microsoft Corporation of America and other countries.
Windows Me , Windows Server and Windows XP are trademarks of Microsoft Corporation.
Ethernet is a registered trademark of Xerox Corporation.
IBM and IBM PC/AT are trademarks of International Business Machines Corporation of
America.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
PaperPort is a registered trademark of ScanSoft Inc. of America and other countries.
All other company and product names contained in this Operation Guide are trademarks or
registered trademarks of their respective companies. The designations
and ® will not be
used in this Operation Guide.
All rights reserved. No part of this material may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording or by any information
storage and retrieval system, without permission in writing from the Publisher.
Legal Restriction On Copying
It may be prohibited to copy copyrighted material without permission of the copyright owner.
It is prohibited under any circumstances to copy domestic or foreign currencies.
Copying other items may be prohibited.
ii
About this Operation Guide
This Operation Guide is meant to be read when the Scanner Interface Card is installed and your
copier is to be used as a network scanner. It explains set-up procedures and other related
operation on the machine.
As the required set-up in order to use the copier as a scanner may differ depending upon the
environment in use in the connected computer, please read those sections related to your
specific computer environment and perform the appropriate set-up procedures explained there.
This Operation Guide should also be read and used together with the appropriate Operation
Guide <Functions Edition> (On-Line Manual) that is on the included CD-ROMs. The On-Line
Manual <Functions Edition> explains how to scan, various setting methods, and operation
procedures from a computer.
Using the Operation Guide <Functions Edition> (On-Line Manual)
The CD-ROMs included with this product contain the Operation Guide <Functions Edition>
(On-Line Manual) in a PDF (Portable Document Format) file format.
The Operation Guide <Functions Edition> (On-Line Manual) explains how to use the required
applications when using your copier as a network scanner. The main content of the CD-ROMs is
as follows:
Introduction of the network scanner system
Explanation of setting procedures when using an Internet Web browser
Explanation of setting procedures at the scanner
Explanation of attached utilities:
Opening the On-Line Manual
Carry out the following procedures in order to open and view the On-Line Manual.
1
Insert the appropriate CD-ROM into the CD-ROM drive of your computer. The Main Menu
screen for set-up will appear automatically.
2
Click on [Documents] under the [Main Menu] in order to access the desired On-Line Manual
for viewing.
Note Adobe Acrobat Reader must be installed in your computer in order to access the On-Line
Manual. The Adobe Acrobat Reader software is included on the CD-ROMs contained with this
product and can be installed from there directly onto your hard disk.
Scanner File Utility
Address Book
Address Editor
TWAIN Source
Configuration tool
iii
Important:
The use of scanned legally copyrighted materials, such as documents, musical scores, pictures,
woodblock prints, maps, drawings and photographs, for any intent other than your own personal
or home use, or other such purpose, is prohibited under the copyright law without prior
permission from the legal copyright owner.
Simply scanning the following items may result in legal penalty:
Bank notes, coins, government-issue securities, national bonds, local bonds, foreign currencies
and securities, unused postage stamps, government post cards, government stamps, and
securities regulated by the liquor tax law.
Other items that you should also not scan:
It is additionally recommended that you do not attempt to scan government-issue passports, or
licenses, permits, ID cards, securities, commuter tickets, passes, books of tickets and meal
coupons issued by public organizations or private parties.
iv
Getting connected
The following procedures are required in order to use this machine as a scanner.
Connect the scanner to your computer
<Example connection>
Perform the required operation at the scanner
Perform the required operation at your computer
Hub
Network cable
PC
Connecting the scanner to your computer
network with a network cable
(100BASE-TX and 10BASE-T)
page 2-2
Basic scanner settings
(register the host name and IP address, etc.)
page 2-3
Date/time and time difference settings
page 2-4
PC
Registering and editing user information
Registers users (transmitters) who use the scanner.
See the Online Manual <Functions Edition>.
Installing the various software (included on the enclosed
CD-ROM disk)
Scanner File Utility
Saves the scanned image as a data file on your computer.
TWAIN Source
Enables you to operate scanning from a TWAIN-compatible application.
Address Book
A personal address book that you can access from the scanner’s operation
panel.
Address Editor (Management Tool)
Enables you to register and edit the shared Address Book, make
network-related settings and change various default settings.
Refer to the On-Line Manual <Functions Edition> for more detailed
information on the included software.
You’re now ready to scan!
v
Table of contents
1 Preparations ................................................................................................... 1-1
Names of parts .........................................................................................................................1-1
Main body ...........................................................................................................................1-1
Operation Panel ..................................................................................................................1-2
Accessories ..............................................................................................................................1-3
Utilities and other software (the main content of the included CD-ROMs) ...............................1-3
Required items .........................................................................................................................1-3
2 Set-up .............................................................................................................. 2-1
Setting up the scanner .............................................................................................................2-1
Outline and network configuration ......................................................................................2-1
Connecting the scanner to your computer network ............................................................2-2
Network (TCP/IP) settings ..................................................................................................2-3
User registration ................................................................................................................2-4
Date/Time and Time Difference ..........................................................................................2-4
Other settings .....................................................................................................................2-5
Setting up the scanner software ...............................................................................................2-6
System requirements ..........................................................................................................2-6
Installing the software .........................................................................................................2-6
Installing the utilities ...........................................................................................................2-7
Installing the TWAIN source ...............................................................................................2-8
3 Performing the Required Operation at the Scanner ................................... 3-1
Scanning under the Scan to PC and Send E-mail functions ....................................................3-1
Before using the Scan to PC function .................................................................................3-1
Before using the Send E-mail function ...............................................................................3-1
How to scan under Scan to PC and Send E-mail ...............................................................3-1
Sending information ............................................................................................................3-3
Scanning with TWAIN ..............................................................................................................3-4
When performing the scanning operation at the scanner ...................................................3-4
When performing the scanning operation at your computer ...............................................3-5
Scan setting .............................................................................................................................3-6
vi
1-1
1Preparations
Names of parts
Main body
1 Original cover — Open and close this cover when setting an original on the platen.
2Platen Set the original to be scanned face-down in the left-rear portion of the platen.
3 Original size indicator lines — Be sure to align the original with these lines when setting an
original on the platen.
4 Operation panel — Perform operations here.
5 Main switch — Turn this switch ON (|) when using the scanner.
6 Scanner interface connector — Use to connect the scanner to the computer network with a
10BASE-T or 100BASE-TX cable.
Important! NEVER attempt to remove the Scanner Interface Card.
1
2
45
6
3
Preparations
1-2
Operation Panel
1 System Menu/Counter key Press this key when you want to set the network address, the
date/time, and the time difference of this scanner.
2 Message display — Indicates the scanner condition or setting values.
3 Numeric key Press these keys when you want to enter a desired value directly. If there is a
number in front of the selection item, you can select the item with these Numeric keys.
4 Stop/Clear key Press this key when you want to cancel setting and return to the previous
screen.
5 Reset key Press this key when you want to cancel initial setting change or date/time setting.
6 Scanner key — Press this key when you want to switch the machine to the scanner mode.
When the scanner mode is selected, the scanner indicator will light up.
7 S and T cursor keys — Press these keys to select an item in various settings.
8 < and > cursor keys Press these keys to change the date/time setting.
9 Enter key Press this key when you want to register a setting. Press this key when scanning
is completed
8
1 4572
39
6
Preparations
1-3
Accessories
Prior to using the scanner for the first time, verify that the following accessories are included with
this product.
1 CD-ROM (Scanner Library)
1 CD-ROM (TWAIN-compatible application)
Operation Guide
Utilities and other software (the main content of the included CD-ROMs)
CD-ROM (Scanner Library)
Scanner File Utility
•TWAIN Source
Address Book
•Address Editor
Configuration Tool
Acrobat Reader
On-Line Manual
Read me
Note Refer to the On-Line Manual <Functions Edition> of this Operation Guide for information on using
the included utilities and other software.
CD-ROM (TWAIN-compatible application)
Required items
You must have on hand one of the following cables as appropriate to your computer network
environment.
100BASE-TX cable (shielded type)
10BASE-T cable (shielded type)
Note Be absolutely sure that the 10BASE-T or 100BASE-TX cable that you use is a shielded cable.
Preparations
1-4
2-1
2Set-up
Setting up the scanner
Outline and network configuration
Example of transmission modes for data scanned using the Scan System and the required software
The software indicated in the thick-lined balloons is included with this product. Install the software
that is appropriate to your operating environment and needs.
Note Refer to the On-Line Manual <Functions Edition> for information on using the included utilities and
other software.
Set-up
2-2
Connecting the scanner to your computer network
1
Turn the main switch located on the right side of the
scanner OFF ({).
Caution ALWAYS turn the main switch to the scanner OFF BEFORE connecting the network cable.
2
Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located at the back side
of the right side of the scanner.
Important! NEVER attempt to remove the Scanner Interface Card.
3
Turn the main switch to the scanner back ON ( | ).
Set-up
2-3
Network (TCP/IP) settings
This section explains the procedures to set the network address for the scanner.
Notes The network address that should be set here will differ depending upon your network
environment. Check with your network administrator BEFORE performing this setting.
If you are using a DHCP server to set the network addresses, you will not need to change the
IP address and the subnet mask because the DHCP has been enabled (ON) as the factory
default setting.
1
Press the System Menu/Counter key to display the
Default setting screen.
2
Use the S and T keys to move D to select Scan
default and then press the Enter key. The password
entry screen will appear.
3
Enter the password with Numeric keys. The password
at the factory default setting is 1600 for the 16 ppm
model and 2000 for the 20 ppm model.
Notes If the password matches, the screen will change to the Scanner setting screen.
Four-digit password can be changed. Refer to the Operetion Guide of machine.
4
Use the S and T keys to move D to select DHCP and
then press the Enter key. Screen will change to the
DHCP/BOOTP setting screen.
5
Use the S and T keys to move D to select 1 Off
and then press the Enter key. Screen will return to the
Scanner setting screen of Step 4.
Note If you are using a DHCP server, select 2 On. In this case, even if you enter each IP address and
subnet mask manually, the entered settings will be ignored.
6
Use the S and T keys to move D to select IP
address and then press the Enter key. Screen will
change to the IP address setting screen.
7
Enter the IP address by every three digits with Numeric
keys. Press > key to move to the following three digits.
Check the entered IP address and then press the
Enter key if it is correct. Screen will return to the
Scanner setting screen of Step 6.
Copy default
Machine default
Default setting / Counter
Scan default
Enter pin code using # key.
Subnet
Scanner setting.:
Gateway
DHCP
255.255.255.255.
255.
On
255. 255. 255.
:
:
:
Off
On
DHCP/BOOTP
>
IP address
Subnet
Scanner setting.:
Gateway
255. 255. 255.255
255. 255. 255.255:
:
:0.0.0.0
IP Address
200 200. . 200200 .
Set-up
2-4
8
In the same manner, set Subnet for subnet mask and
Gateway for gateway addresses.
9
Once it is complete to enter all network addresses and
returned to the Scanner setting screen of Step 7, use
the S and T keys to move D to select End and then
press the Enter key.
Note In a network environment with RARP, select RARP and then select On on the Scanner setting
screen. In this case, you will not need to set the IP address manually.
10
For other network settings, use a web browser or Address Editor.
User registration
To use the scanner, user registration is needed in addition to the network setting. User (transmitter)
registration is performed from a web browser or Address Editor. For details, see the Online Manual
<Functions Edition>.
Date/Time and Time Difference
Sets the required area information for the Send E-mail function. The time of day when email is sent
from the scanner is included in the header of that email message as the transmission time. Perform
the following procedure in order to set the date and time in your area, as well as the time difference
to GMT (Greenwich Mean Time).
1
Press the System Menu/Counter key.
2
Use the S and T keys to move D to select Machine
Default and press the Enter key. The password entry
screen will appear.
3
Enter the password using the numeric keys. The
password at the factory default setting is 1600 for the
16 ppm model and 2000 for the 20 ppm model.
4
Use the S and T keys to move D to select Day/Time
and press the Enter key.
5
Use the S and T keys to move D to select the item to
be changed and use the < and > keys to select the
desired setting.
IP address
Subnet
Scanner setting.:
Gateway
200. 200. 200.200
255. 255.255:
:
:
255.
0. 0. 0. 0
End
IP address
Scanner setting.:
Subnet
200. 200.200:
:
200.
255. 255. 255.255
Management
Copy default
Default setting / Counter
Machine default
Enter pin code using # key.
Low power mode c
Key sound ON/OFF
Machine default
Day/Time
15Min.
On
0935
End
Time
Day/Time
DST
0935
OFF
Set-up
2-5
Note Set the time difference and then the date and time.
6
After completing the settings, move D to select End
and press the Enter key. The settings will be
registered.
Note If you change both the summer time and date/time settings, the summer time setting will be ignored.
Other settings
It is possible to change certain default settings for the scanner function. Refer to the Online Manual
for details on each setting.
End
Time
Day/Time
DST
0935
OFF
Set-up
2-6
Setting up the scanner software
System requirements
Installing the software
There are three main functions available with this network scanner. Perform the following procedure
in order to install into your computer the required utility that is appropriate to the application and
operating system in use in your computer.
Scan to PC
Stores the image data of scanned originals as a file in a desired folder on your computer. Install the
Scanner File Utility into the corresponding computer in order to use this function.
Note Registration of the save folder in your computer, as well as registration in the scanner of the
destination is required.
For information on making settings from an Internet Web browser, as well as for each utility,
refer to the On-Line Manual <Functions Edition> of this Operation Guide.
Send E-mail
Sends the image data of scanned originals to the desired receiver as a file attached to an email
message.
Note Registration in the scanner of the corresponding SMTP server settings is required. For information
on making settings from an Internet Web browser, as well as for each utility, refer to the On-Line
Manual <Functions Edition> of this Operation Guide.
TWAIN
Connects to the scanner from the TWAIN-compatible application according to the procedures of that
particular application. Install the TWAIN Source on the computer that contains the application in
order to use this function.
PC IBM PC/AT or compatible
OS Windows 95 (OSR2), Windows 98 (Second Edition),
Windows NT 4.0 (Service Pack 5 or later), Windows
2000 (Service Pack 2 or later), Windows Me, Windows
XP or Windows Server 2000
System environment CPU Pentium 133 MHz or faster
RAM 64 MB or more
HDD 20 MB or more
Recommended environment CPU Celeron 500 MHz or faster
RAM 128 MB or more
HDD 300 MB or more
CD-ROM drive 1 drive
Ethernet cable 10BASE-T or 100BASE-TX
Set-up
2-7
Installing the utilities
The following utilities are contained on the CD-ROM that is included with this product.
Note Refer to the On-Line Manual <Functions Edition> of this Operation Guide for information on using
the included utilities.
Scanner File Utility
Address Book
Address Editor (Management Tool)
1
Run Windows.
Quit all other applications that may be open.
2
Insert the CD-ROM that is included with the scanner into the CD-ROM drive of your computer.
3
The License Agreement will be displayed. If
you agree with the conditions contained
therein, click on [Accept].
If this screen does not appear after you
insert the CD-ROM, open the CD-ROM
window to access its contents and
double-click on the [setup.exe] file.
4
Click on [Scanner Utilities] in the Main
Menu.
5
Click on the name of the utility that you want to install. The installation window for that utility will
appear. Follow the instructions on screen in order to install the selected utility.
Set-up
2-8
Installing the TWAIN source
In order to scan originals using PaperPort, TWAIN Source must be installed PRIOR to installing the
PaperPort application.
1
Run Windows.
Quit all other applications that may be open.
2
Insert the CD-ROM that is included with the scanner into the CD-ROM drive of your computer.
3
The License Agreement will be displayed. If
you agree with the conditions contained
therein, click on [Accept].
If this screen does not appear after you
insert the CD-ROM, open the CD-ROM
window to access its contents and
double-click on the [setup.exe] file.
4
Click on [TWAIN Source] in the Main Menu.
5
The Model Select window will appear. Select the model of the scanner that you are using.
6
When the installation window appears, follow the instructions on screen in order to install the
TWAIN Source.
3-1
3 Performing the Required Operation at the
Scanner
Scanning under the Scan to PC and Send E-mail functions
Before using the Scan to PC function
When performing the Scan to PC function, perform the following settings in advance.
1
Install the Scanner File Utility in the destination computer.
2
Run the Scanner File Utility and register the destination folder for the scanned image data.
3
Register the IP address, the registration name, and the destination number of the destination
computer in the scanner using a web browser or Address Editor.
Note Be sure to enter the same number in the Save folder No. field here as the save folder number (001 –
100) that was registered in the Scanner File Utility.
Refer to the On-Line Manual <Functions Edition> for more detailed information.
Before using the Send E-mail function
Register the destination name and the email address in the scanner using a web browser or
Address Editor.
How to scan under Scan to PC and Send E-mail
1
Press the Scanner key to display the Select Scanner
Function screen.
2
Use the S and T keys to select 1 Scan to PC
(SEND TO PC) or 2 Send E-mail.
3
Use the S and T keys to move D to select your user
name and press the Enter key.
Notes If a password has been registered for the selected user, you must enter the password. Enter the
password using the numeric keys and press the Enter key.
If your user name is not displayed even if the S and T keys are pressed, use a web browser
or AddressEditor to check to see if your user name has been registered.
Scan to PC
Send E-mail
Select function.
TWAIN
Select User
001 USER ABCDE
#---
Performing the Required Operation at the Scanner
3-2
4
Use the S and T keys to move D to select the desired destination. An item can be selected from
Sending to User (SEND TO USER PC), Private Book, and Common Book. Select the
desired item and press the Enter key.
When storing data in the PC of the transmitter (user):
Move D to select 2 Sending to User (SEND TO
USER PC) and press the Enter key.
Note When registering a transmitter (user), you must set the IP address of the computer.
When selecting a destination (receiver) from the private
address book:
1. Move D to select 3 Private Book and press the
Enter key.
2. Move
D to select the desired destination and press
the Enter key.
Notes If a password has been registered for the selected destination, you must enter the password.
Enter the password using the numeric keys and press the Enter key.
When you enter a displayed number using the numeric keys, the confirmation screen will
appear. When you press the Enter key, the destination will be selected.
3. If you have selected the destination, move
D to
select 000 Finish to select (000 SELECT.
COMPLETE) and press the Enter key.
When selecting a destination (receiver) from the common
address book:
Move D to select 4 Common Book and press the
Enter key.
Operate in a similar way to the procedure for the
private address book.
Notes For the private address book, AddressBook must be started in the computer of the transmitter
(user).
For the common address book, the destinations must be set with a web browser or
AddressEditor.
Up to 20 destinations can be selected at the same time.
End
Sending to User
Select Address Book
Private Book
:Off
End
Sending to User
Select Address Book
Private Book
:Off
Select destination.
000 Finish to select
#---
001 AdrNOPQRSTUVWXYZ
Select destination.
000 Finish to select
#---
001 AdrNOPQRSTUVWXYZ
Sending to User
Private Book
Select Address Book
Common Book
:Off
Performing the Required Operation at the Scanner
3-3
5
Finally move D to select 1 End and press the Enter
key. The scanner setting screen will appear. See Scan
setting on page 3-6.
Sending information
The history of sending with the Send E-mail and Scan
to PC functions is displayed.
Press the Scanner key, use the S and T keys to
move
D to select 4 Sending Information (SEND
INFORMATION), and press the Enter key.
The sending confirmation list will be displayed. For more details of the history, move
D to select the
desired history and press the Enter key.
End
Sending to User
Select Address Book
Private Book
:Off
End
ABCD
Sending Confirmation List
EFGH NG
OK
0556
1456
ABCD
EFGH
Performing the Required Operation at the Scanner
3-4
Scanning with TWAIN
The following explains the settings that need to be made in the scanner in order to scan using the
TWAIN function.
When performing the scanning operation at the scanner
1
Press the Scanner key to display the Select Scanner
Function screen.
2
Use the S and T keys to move D to select 3 TWAIN
and press the Enter key. The TWAIN Mode screen will
appear.
3
Set the original that you want to scan.
4
Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN
Source will appear. Make any settings that you want, click on the [Connect] button in the dialogue
box and, once the connection to the scanner is made, click on the [Scan] button. Scanning will
begin.
Scan to PC
Send E-mail
Select function.
TWAIN
Performing the Required Operation at the Scanner
3-5
When performing the scanning operation at your computer
1
Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN
Source will appear. Make any settings that you want, and put a check mark in the [Waiting Scan]
checkbox.
2
Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is
made, click on the [Scan] button.
Note Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning
operation by pressing the Start key at the scanner.
3
Set the original that you want to scan in the scanner
and press the Start key. Scanning will begin.
Notes Scan settings can also be made on the operation panel of the scanner. Change any settings
there that you want.
If you enter different settings in your computer and in the scanner, the settings made on the
operation panel of the scanner will take priority.
Performing the Required Operation at the Scanner
3-6
Scan setting
The scan setting screen is displayed when scanning originals. To carry out the various settings, perform the following
procedures. After completing the scan settings, if you set an original in the scanner and press the Start key, scanning will
start.
A Auto Exposure key Press this key to select the automatic exposure setting.
B Image concentration adjustment key Press these keys to select an exposure level.
Notes 7 levels in the normal mode, 13 levels in the maximum mode.
If the automatic exposure mode is set, all the exposure indicators are off.
C Auto%/100% key Press this key when you enable automatic paper orientation selection
depending on the original in the gray scale mode.
D Original Image Type key Press this key to select the original image type.
Note The Photo mode cannot be selected with the Send E-mail function.
E Original Size key Press this key to specify the original size.
F Paper Select key Press this key to specify the transmission (image) size. The scanned
original image will be automatically reduced or enlarged to the specified size.
Note In the gray scale mode, the orientation of paper will be changed with this key. To enable again the
automatic paper orientation selection depending on the original, press the AMS/100% key.
G Scanner Function key The following settings can be adjusted.
Resolution
File type
Original type
•Auto selection
Border erase
Original set direction
Continuous scanning
Output by page
Note For details on each setting, see the Online Manual.
H Enter key Press this key to confirm the setting in various setting screens.
IStart key Press this key to start scanning.
J Stop/Clear key Press this key to stop scanning, clear an entered value or return to the
previous screen.
K Scanner key If you select this key to cancel scan setting, the scan setting screen will
appear.
K
G
C
E
F
H
J
D
A
B
I
Performing the Required Operation at the Scanner
3-7
1
After completing the setting, display the scan setting
screen.
2
Set the original.
3
Press the Start key. Scanning the original starts.
4
When Continue scan (MULTIPLE SCAN) is set On
on the scan setting screen, the screen will appear to
select whether to continue scanning originals or not
when scanning is complete.
Notes To continue scanning, set the next original, change the settings as needed, and press the Start
key.
Press the Enter key when you want to complete scanning originals.
When you want to cancel all scanned copies, press the Stop/Clear key. Screen will return to
the scan setting screen of Step 1.
Ready to scan.
Auto
100%
Auto PDF
600dpi
Press START to continue scan.
Auto
100%
Press ENTER if completed.
Auto PDF
600dpi
Performing the Required Operation at the Scanner
3-8
MEMO
E1
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Operation Guide Scan System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Operation Guide Scan System Set-up in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info