685860
155
Zoom out
Zoom in
Previous page
1/160
Next page
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
155
孔井或竖井的深度超过 5 m 时,将电源
线每 5 m 固定在固定绳上(减轻张
力)。
使用底座垂直安装泵
(nur ProMax Pressure Automatic 6000/8)
在水箱或井中可以通过底座垂直放置泵。
吸入侧的筛网必须低于水平面至少150
毫米。
待抽送的水中可含的沙量不得超过50
/m
3
如下
D
1. 将支脚推入底座。
2. 拧松内六角螺钉,直到底座可容纳泵。
3. 将泵推入底座。
4. 拧紧内六角螺钉,直到泵被固定在底座
上。
使用底座水平安装泵
(nur ProMax Pressure Automatic 6000/8)
在浅水箱或井中可以通过底座水平放置泵
泵必须完全水平对齐。
抽送的水中不可含沙。
如下
E
1. 除去内六角螺钉。
将底座分为两部分。
2. 在每部分底座推入两个支脚。
3. 分别在每个贯通口的槽中插入三个橡胶
缓冲器。
在两个底座安装橡胶缓冲器。
4. 将两个底座套在泵上。
两个底座之间的距离必须尽可能地
大,以便泵稳固。
运行
泵控制装置 flow control 测量流量,流
量不足时关闭泵。
水不足时该泵关闭,从而避免由于干运
行而损坏泵。
在自动模式由泵的控制装置负责泵的启
动和关闭。
集成的止回阀防止在关闭后水从压出管流
回泵。此外,止回阀可防止水锤对泵造成
损坏。
自动模式
如果不再有水被抽出,而在压出管中的压
力达到最大,泵自动关闭。
如果有水被抽出,而在压出管中的压力低
3.5巴,泵自动启动。
警告
危险电压!
触电导致重伤或死亡
只有在确定没有人站在水中或接触水的
情况下,才能将水中泵与电源连接。
在入水或将手伸入水中之前断开水中所
有设备的电源。
打开设备
将电源插头插入插座。
泵准备就绪
关闭设备
拔出电源插头
关闭后,软管中的剩余水可能回流并
通过泵的吸入口流出。
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase ProMax Pressure Well 6000-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase ProMax Pressure Well 6000-8 in the language / languages: All languages as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info