Manual Oase ProMax Pressure 6000-8 (page 13 of 160) (All languages)

685859

Zoom out

Zoom in

1/160

Intended use

ProMax Pressure Automatic 6000/8,

Pressure Well Automatic 6000/8, referred

to as "unit", may only be used as specified

in the following:

• For pumping clear water or rain water.

• For irrigating and watering.

• For pumping the water out of water

butts/rain barrels or cisterns.

• Operate in accordance with instruc-

tions.

Possible incorrect use

The following restrictions apply to the unit:

• Not suitable for salt water.

• Not suitable for drinking water.

• Do not use for long-term operation (e.g.

continuous recirculation of the water in

a pond).

• Do not use for commercial or industrial

purposes.

• Do not use in conjunction with chemi-

cals, foodstuff, easily flammable or ex-

plosive substances.

• Do not connect to the drinking water

supply.

INSTALLATION AND CONNECTION

Connecting the pressure hose

An optimum flow rate is achieved with a

hose inside diameter of 25 mm (1").

How to proceed:

 B

1. Remove the protection cap.

2. Connect the pressure hose to the con-

nection on the pressure side.

– Recommendation: Use a quick-re-

lease coupling.

Installing the pump in a bored well or

shaft

 C

• Attach the fixing rope with a double knot

to the lugs and lower the pump into the

bored well or shaft.

• Use the fixing rope to fix the pump at a

height of at least 1 m above the bottom

of the well or shaft.

– This prevents it from drawing in dirt

particles.

• Ensure that the screen on the suction

side is at least 150 mm below the sur-

face of the water.

• Do not carry the pump by its power con-

nection cable.

• From a well or shaft depth of 5 m, fix the

power connection cable to the fixing

rope at a distance of 5 m from the pump

(strain relief).

Vertical installation of the pump with

the stand

(Only ProMax Pressure Automatic

6000/8)

The pump can be vertically installed with

the stand in a tank or well.

• Ensure that the screen on the suction

side is at least 150 mm below the sur-

face of the water.

• Ensure that the water to be pumped

does not contain more than 50 g sand

per m

water.

How to proceed:

 D

1. Push the mounting feet onto the stand.

2. Undo the Allen screws until the opening

of the stand is wide enough to fit onto

the pump.

3. Push the pump into the stand.

4. Tighten the Allen screws until the pump

is fixed in the stand.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oase ProMax Pressure 6000-8 in the language / languages: All languages as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oase ProMax Pressure 6000-8 Manual

Product: