Manual Oase ProMax Garden Classic 3000 (page 13 of 179) (All languages)

803248

Zoom out

Zoom in

1/179

Installation and connection

NOTE

If you are using the pump as a booster pump, ensure that the max. internal pressure of 6 bar on

the pressure side is not exceeded.

The pump pressure is added to the pre-pressure.

Example: Pre-pressure = 1 bar, max. pressure of the pump = 4.5 bar, total pressure = 5.5 bar.

To reduce pump noise, connect the pump to the pipework via flexible, pressure-resistant

hose lines for fixed installation.

Equip the suction line with a pre-filter and a non-return or foot valve. In addition, fasten the

suction hose (e.g. tying it to a stake) to take its weight off the pump.

Install the pump in a horizontal and stable position in a dry place.

– For permanent installation of the pump, ensure that a sufficiently large collecting basin can

be positioned underneath the discharge screw for emptying the pump.

If possible, install the pump in a higher position than the container/reservoir from which the

water is to be pumped. If this is not possible, a pressure-proof valve must be fitted between

the pump and the suction hose.

Only use vacuum-proof pressure hoses on the pressure and suction side.

Screw a suction and pressure hose with 25.0 mm internal diameter (1") onto the connections.

POX0030

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oase ProMax Garden Classic 3000 in the language / languages: All languages as an attachment in your email.

The manual is 2.12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oase ProMax Garden Classic 3000 Manual

Product: