693181
164
Zoom out
Zoom in
Previous page
1/168
Next page
- CN -
164 biOrb HALO
K
1. 通过向左旋转过滤器外壳四分之一圈将空气柱
松开(卡口式连接)并上提将其取下。
2. 通过向右旋转滤芯四分之一圈将空气柱松开并
上提将其取下。
3. 将空气柱放到新的滤芯上,并向左旋转四分之
一圈将其固定。
4. 将空气柱插入鱼缸,并向右旋转四分之一圈将
其固定到过滤器外壳上。
更换排气口
前提:
曝气泵已关闭,风管已从曝气泵上拔下。
如下
L
1. 拆卸空气柱。(→ 更换滤芯)
2. 将通风口拔下并更换。
3. 将滤芯装入空气柱并安装空气柱
检查止回阀
如果鱼缸中的水可以流入风管,则止回阀损坏。
如下
M
1. 关闭曝气泵,将风管从曝气泵上拔下。
2. 风管末端保持在鱼缸中的水位以下。
3. 如果有水溢出,则必须更换止回阀。 (→ 更换
回阀)
更换止回阀
前提:
曝气泵已关闭,风管已从曝气泵上拔下。
如下
N
1. 更换损坏的止回阀。
供货时止回阀已安装了风管。
注意安装位置是否正确。
2. 如果不想抽出损坏的阀门,则在距离损坏止回
阀尽可能近的地方剪断风管,并在那里安装新
的止回阀。
3. 先将风管重新安装到曝气泵上,然后再重新接
通曝气泵。
磨损件
陶瓷衬底
排气口
滤芯
丢弃处理
提示
本设备包含电子原件,不得按生活垃圾进行废弃
处理!
通过剪断电线使本设备无法使用。
从设备中移除用于更换的电池或电池组,单独
通过专门的回收系统进行废弃处理。
通过专门的回收系统对设备进行废弃处理
提示
电池的废弃处理
电池不属于生活垃圾。
只可通过专门的回收系统对电池进行废弃
理。
应按欧盟规定对电池进行废弃处理
依据法律规定,消费者有义务交还废旧电池。电
池回收免费。
可通过所在城市或乡镇的公共回收系统对电池
进行废弃处理,也可交还至购买的地方。
含有害物质的电池上的标识
PB = 电池中含有铅
Cd = 电池中含有镉
Hg = 电池中含有汞
Li = 电池中含有锂
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase Biorb Halo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase Biorb Halo in the language / languages: All languages as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info