693181
19
Zoom out
Zoom in
Previous page
1/168
Next page
- EN -
19
PRODUCT DESCRIPTION
Check that the delivery scope is correct, complete
and undamaged.
A
biOrb HALO
1
Operating instructions biOrb HALO
2
Cover with cover ring and product-specific lighting
unit
3
Air column
4
Air hose with integrated non-return valve
5
Aerator pump with connection cable
6
Plug-in transformer
7
Ceramic substrate
Quantity is product-specific
8
Bag with Water Conditioner and/or Biological
Booster
9
Filter unit
WARNING
Danger of suffocation.
Keep plastic bags and small parts out of reach of babies
and young children.
Intended use
Exclusively use the biOrb HALO as follows:
As an aquarium.
Only operate with water at a water temperature of
+4 °C to +35 °C.
Ensure that the water temperature is suitable for
the type of fish.
The supplied components may only be used for the bi-
Orb products as specified in the following:
The aerator pump: For aeration and supplying oxy-
gen to the aquarium.
The lighting unit: For lighting the aquarium.
The plug-in transformer: For connecting the aerator
pump and lighting unit to the mains.
Operation under observance of the technical data.
The following lighting units are approved for lighting
the biOrb HALO aquarium:
biOrb HALO 30/60 LED
biOrb HALO 15/30/60 MCR LED
Function description
Aquarium with LED lighting, filter unit and external
aerator pump for circulating the water.
The light colour depends on the lighting unit used and
can be white, coloured, continuous or automatically
changing.
All the lighting units can be programmed with the ex-
ception of biOrb HALO 30/60 LED.
biOrb HALO 30/60 LED
Daylight: White LEDs are continuously lit
biOrb HALO 30/60 MCR LED
Four modes for automatic changes between differ-
ent daylight and moonlight phases for a period of
24 hours.
The colour and dimming variants are controlled via
the remote control
biOrb HALO 15 MCR LED
White light or individually set coloured light, which
can be set and dimmed by remote control.
INSTALLATION AND CONNECTION
Setting up the aquarium
How to proceed:
Carefully unpack the acrylic aquarium.
Do not expose to direct sunlight.
Only set up in closed rooms.
Do not move the aquarium when it is filled.
Do not place on or near electrical devices.
Do not place on or near heat sources.
Operation under observance of the technical data.
Fitting the filter unit
How to proceed:
Remove the packaging from the filter medium.
B
1. Open the lid.
2. Remove the evaporation tray.
3. Release the air column from the filter housing by a
quarter turn counterclockwise (bayonet closure)
and lift out.
4. Place the air column onto the filter cartridge and
fasten the air column by a quarter turn counter-
clockwise.
5. Insert the air column into the aquarium and fasten
it to the filter housing by a quarter turn clockwise.
Using the ceramic substrate
NOTE
Remove the packaging from the filter medium. Thor-
oughly rinse the ceramic substrate with warm tap wa-
ter before using for the first time to remove any soil-
ing. (→ Replacing the filter cartridge)
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase Biorb Halo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase Biorb Halo in the language / languages: All languages as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info