693176
139
Zoom out
Zoom in
Previous page
1/142
Next page
- CN -
139
清洁和保养
清洁和保养作业:
区域
需要执行的作业
照明单元
必要时清洁。
必要时更换遥控器电池。
鱼缸内的水
4
6
周部分更换。带滤芯。
滤芯
根据鱼的总量,每 4
6
周更换。
排气口
6
个月更换。
曝气泵
必要时每 12
个月更换。
滤芯,用于水处理的工具和清洁布作为 OASE biOrb
Service Kit (46014) 购买。
处理水
前提:
已提前 24 h Water Conditioner处理了新鲜水并
静置,直至其达到室温。所需的量:约鱼缸容积
的三分之一。
步骤如下:
G
1. 排掉需要更换的水,必要时用丙烯酸玻璃的清
洁垫清洁鱼缸。
OASE 建议:
biOrb 腐殖土抽吸装置 (46025)
清洁垫(46027,粗糙的一面仅用于清洁顽固的
沉积物)。
2. 用处理过的水重新注满鱼缸。
更换滤芯
提示
开始保养作业前,先断开曝气泵。
作业结束后重新接通曝气泵。
步骤如下:
拆除包裹过滤材料的包装。
H
1. 通过向左旋转过滤器外壳四分之一圈将空气柱
松开(卡口式连接)并上提将其取下。清理旧
的滤芯。
2. 通过向右旋转滤芯四分之一圈将空气柱松开并
上提将其取下。
3. 将空气柱放到新的滤芯上,并向左旋转四分之
一圈将其固定。
4. 将空气柱插入鱼缸,并向右旋转四分之一圈将
其固定到过滤器外壳上。
更换排气口
步骤如下:
I
1. 拆卸空气柱和滤芯。
2. 将通风口拔下并更换。
3. 将滤芯装入空气柱并安装空气柱。
检查止回阀
如果鱼缸中的水可以流入风管,则止回阀损坏。
步骤如下:
J
1. 关闭曝气泵,将风管从曝气泵上拔下。
2. 风管末端保持在鱼缸中的水位以下。
3. 如果有水溢出,则必须更换止回阀。 (→ 更换
回阀)
更换止回阀
前提:
曝气泵已关闭,风管已从曝气泵上拔下。
步骤如下:
K
1. 如果不想抽出损坏的阀门,则在距离损坏止回
阀尽可能近的地方剪断风管,并在那里安装新
的止回阀。
2. 更换损坏的止回阀。
供货时止回阀已安装了风管。
注意安装位置是否正确。
3. 先将风管重新安装到曝气泵上,然后再重新接
通曝气泵。
磨损件
曝气泵
陶瓷衬底
排气口
滤芯
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase Biorb Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase Biorb Classic in the language / languages: All languages as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info