693182
160
Zoom out
Zoom in
Previous page
1/166
Next page
- CN -
160 biOrb AIR 60
栽种
前提
自动加湿单元拆卸完毕。
准备椰子堆肥
如下
E
1. 向椰子堆肥块放入约 3 升水,等待约 30 分钟,
直到椰子堆肥完全将水吸收。
2. 捣碎椰子堆肥,均匀地分布在有毛细管的垫
上。
在椰子堆肥上栽种
可以在大量、中量或少量堆肥上栽种。
如下
F
1. 在椰子堆肥上栽种。
2. 小心地(避免被有机玻璃划伤!)将半升水沿
椰子基底边缘注入水箱底部,直到水位显示器
显示额定高度。
3. 24 小时之后检查水位,必要时将水补充至额
定高度。
调试
填充自动加湿单元的水箱
提示
只能使用提供的HumidiMist 。它的 PH 为中性,
不含钙和矿物质。
使用其他介质可能导致在有机玻璃上形成
点,或者降低其透明度。
前提
biOrb AIR 60 盖子已打开。
如下
G
1. 从自动加湿单元上取下盖子。
2. 小心地将 HumidiMist 填注到水位传感器上标记
的位置。
保持自动加湿单元的插头干燥。
3. 将盖子重新安装到自动加湿单元上。
4. 关闭 biOrb AIR 60 盖子。
插入/更换电源接口转接器
如下
H
1. 将与插座匹配的电源接口转接器推入插头电源
件的导向装置中,直到可以听到转接器卡入的
声音(咔嚓声)。
2. 更换电源接口转接器:按下止动按钮,同时将
转接器从导向装置中推出。
3. 插入其他电源接口转接器。
接通 / 关闭
在首次接通时
照明灯亮起,在 15 秒内达到最大亮度。必须单
独启动 24 小时循环 (→ 操作)
以中速启动通风器,
AIR 将根据需要产生雾气,以保持自动设定的平
均空气湿度。您可以通过短暂按下操作按钮,
来手动制造雾气。
可以对各种自动设置进行修改。(→ 操作)
如下
I
1. 将空心插头插入盖环的插口中。
2.
开启:将插头电源件插入插座。
3. 形成滴注回线。
喷雾器单元和风扇立刻启动。
4.
关闭:拔下插头电源件。
操作
传感器控制的自动加湿单元和通风器组合作用,
可以确保恰当地加湿植物,并且可按照栽种密度
进行设置。
J
栽种密度
稀疏
中等
密集
前提
建立电源连接。
信息/显示
照明灯发出故障和设置变化的信号。
照明灯每小时从亮到暗切换一次:必须补
HumidiMist
照明灯持续闪烁:自动加湿单元不起作用,加
湿单元插头位置不正确。
设置 24 小时照明灯
K
如下
1. 关闭 biOrb AIR 60水箱盖,按住设置按键约
3 秒。
照明灯以 24 小时循环启动。每个循环以持续
的亮度增加(30 分钟)开始,以持续的亮度
降低(30 分钟)结束。
通过照明灯短时间切换确认设置(增加和
低亮度)。
2. 为了修改启动时间,在所需的启动时间重新按
住按键约 3 秒。
设置自动加湿单元
每种植物的加湿量可能不同。
建议:
栽种密度稀疏:低量
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase Biorb AIR 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase Biorb AIR 60 in the language / languages: All languages as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info