693182
19
Zoom out
Zoom in
Previous page
1/166
Next page
- EN -
19
SCOPE OF DELIVERY
Check that the contents are correct, complete and
undamaged.
NOTE
Carefully unpack the unit.
Do not lift the unit by its cover.
How to proceed:
B
1. Pull out the corner columns.
Accessories are located inside the corner col-
umns.
2. Hold the container with both hands, one on each
side and lift it out.
A
biOrb AIR 60
1
biOrb AIR 60 Container with cover
2
Water level cleaner
3
Spray attachment
4
Bottle with HumidiMist
5
Plug-in power pack with mains connection adapters
6
Capillary matting
7
Coir compost
8
Substrate support tray
9
Heater cable access duct & rubber stopper
10
Operating instructions
PRODUCT DESCRIPTION
WARNING
Danger of suffocation.
Keep plastic bags and small parts out of reach of babies
and young children.
Intended use
biOrb AIR 60 may only be used as follows:
As Terrarium (mini ecosystem for plants).
The supplied components may only be used for the bi-
Orb products as specified in the following:
Automatic misting unit: For generating humidity in
the biOrb AIR 60.
Plug-in power pack: For connecting the automatic
misting unit and lighting unit to the mains.
By replacing the adapter, the plug-in power pack
can be adapted to the existing socket and electri-
cal voltage.
Function description
Terrarium with LED lighting, sensor-controlled auto-
matic misting unit for humidifying the introduced
plants, fan and filter cartridge for cleaning the air.
INSTALLATION AND CONNECTION
Setting up the container
How to proceed:
Do not expose to direct sunlight.
For indoor use only.
Do not move the terrarium when it is filled.
Do not place on or near electrical devices.
Do not place on or near heat sources.
Operate in accordance with instructions.
Removing/inserting the automatic misting unit
How to proceed:
C
1. Open the biOrb AIR 60 container cover.
2. Disconnect the plug from the cover ring.
3. Remove the container of the automatic misting
unit.
4. Reinsert the automatic misting unit and insert the
plug.
Installing the substrate support
tray
Prerequisite
The automatic misting unit has been removed.
How to proceed:
D
1. Place both parts of the substrate support tray with
the flat sides on top of each other and push the
hinges together until they engage with a click.
2. Fold open the substrate support tray and place the
capillary matting inside it.
Ensure that the opening in the centre of the mat-
ting aligns with the opening in the substrate sup-
port tray.
3. Use the loops to fasten the matting on the rear of
the support tray.
4. Fold up the support tray together with the matting
and insert it in the container.
5. Fold open the support tray with the matting again.
6. Fit the substrate support tray over the access duct
in the middle of the container.
7. Seal off the access duct with the rubber stopper.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oase Biorb AIR 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oase Biorb AIR 60 in the language / languages: All languages as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info