Manual O2 XDA Exec (page 15 of 196) (English)

493016

Zoom out

Zoom in

1/196

Getting Started | 15

1.2 Installing the USIM or SIM Card

Follow these steps to install a 3G USIM (Universal IC Card) or a GSM

SIM (Subscriber Identity Module) card provided by your local network

service provider that contains your phone number, service details, and

phonebook/message memory.

Note Ensure the device is in the sleep mode before you install the USIM or

SIM card.

1. Remove the back cover by pressing the ﬁxing lock.

2. Push the red battery lock down to unlock the battery pack.

3. Press the clip on the right side to remove the battery.

4. Insert the SIM card into the SIM card slot with its gold contacts

facing down. Its cut-off corner should match the cut-off corner in

the slot. Push down lightly and forward to snap it into place.

5. Replace the battery and gently push down to snap it into place.

6. Push the red battery lock back up to lock the battery.

7. Replace the cover: Slide it back on, then push down lightly at the

bottom to snap it securely into place.

locked unlocked

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of O2 XDA Exec in the language / languages: English as an attachment in your email.

The manual is 9,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

O2 XDA Exec Manual

Product: