703082
9
Zoom out
Zoom in
Previous page
1/15
Next page
16 17
POWER BUTTON
EXTRACTING FOR SOUPERBLASTS
Twist the Extractor Blade onto the SouperBlast Pitcher.
Add ingredients into the
SouperBlast Pitcher
and
securely attach the vented, 2-piece lid SouperBlast
Pitcher Lid.
Plug the power base into an electrical outlet. Press
the power button located 90˚ to the left side of the
G-button, to turn the machine on. Next, place the
cup blade-side-down onto the power base. This will
activate the NutriBullet Rx’s SMART Technology
function, causing the G-Button at the front of the unit
to glow GREEN.
Press the GREEN G-Button down for 2 seconds
until it glows RED. This will indicate that
SouperBlast Mode has begun. The unit will run
in SouperBlast Mode for about 7 minutes before
automatically turning off, causing the ingredients
inside the SouperBlast Pitcher to heat up to about
70 degrees Celsius/150 degrees Fahrenheit. The
unit is programmed to slow down twice during the
7-minute cycle to allow ingredients to settle for
improved processing. This is normal
.
Do not repeat SouperBlast Mode for the
same hot soup. If more heat is required, place
the contents in a microwave-safe container and
continue heating to desired temperature. To
make a new soup, empty old contents, add new
ingredients and wait 1 full minute before returning
the vessel to the Power Base to start a new SMART
Technology cycle. Do not repeat more than 2
cycles in SouperBlast mode resting 1 minute
between cycles. After 2 consecutive cycles,
allow the NutriBullet Power Base and SouperBlast
accessories to cool off for 30-60 min. Depress the
power button upon completion.
1
2
3
4
WARNING: AFTER SOUPERBLAST MODE, THE SOUPERBLAST PITCHER SURFACE, BLADES
AND COUPLING GEAR WILL BE HOT! DO NOT TOUCH DIRECTLY WITH HANDS! ALWAYS USE
HEAT RESISTANT PADS TO GRASP THE HANDLE AND TO SUPPORT THE BOTTOM OF THE
SOUPERBLAST PITCHER.
IF YOU DESIRE SOUP TO BE HOTTER OR YOU WISH TO RE-HEAT SOUP, TRANSFER
FIRST TO AN APPROPRIATE MICROWAVE SAFE CONTAINER OR STOVE TOP POT
AND HEAT SEPARATELY—DO NOT REHEAT IN THE NUTRIBULLET Rx.
TO TURN OFF THE MACHINE AT ANYTIME DURING THE SOUPERBLAST CYCLE (G
BUTTON WILL BE RED), PRESS THE POWER OFF BUTTON, LOCATED 90˚ TO THE
LEFT SIDE OF THE G-BUTTON OR LIFT THE SOUPERBLAST PITCHER OFF THE
POWER BASE.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NutriBullet RX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NutriBullet RX in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NutriBullet RX

NutriBullet RX Manual - English - 85 pages

NutriBullet RX User Manual - German - 72 pages

NutriBullet RX User Manual - Dutch - 28 pages

NutriBullet RX User Manual - French, Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info