796731
3
Zoom out
Zoom in
Previous page
1/18
Next page
WARNING! TO AVOID THE RISK OF SERIOUS INJURY, CAREFULLY READ
ALL INSTRUCTIONS BEFORE OPERATING YOUR NUTRIBULLET PRO+™.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
GENERAL SAFETY INFORMATION
Close supervision is necessary when an electrical appliance is used by or
near children. Keep cord out of reach of children.
NEVER LEAVE THE NUTRIBULLET® UNATTENDED WHILE IT IS IN USE.
HEAT AND PRESSURE SAFETY
DO NOT BLEND HOT INGREDIENTS OR LIQUIDS! Never put hot
ingredients in any of the closed-top Blending Containers before or while
blending. The heat from the ingredients can cause pressure to build up
in the sealed containers causing possible expulsion of hot ingredients
which may cause personal injury or property damage. Start with room
temperature or cooler ingredients (21°C/70°F or less).
• To prevent overheating and pressure build up, NEVER ALLOW THE
NUTRIBULLET® TO RUN MORE THAN ONE MINUTE at a time as it may
result in the contents overheating which can increase the pressure and
may cause the container to burst, resulting in possible personal injury or
property damage.
Never blend carbonated liquid or ingredients (i.e., baking soda). Built-
up pressure from released gases can cause the Blending Container to
burst, resulting in possible injury.
• FRICTION FROM THE ROTATING EXTRACTOR BLADES WHEN BLENDING
CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL
PRESSURE IN THE SEALED BLENDING CONTAINER, IF LEFT TO RUN FOR
LONGER THAN A MINUTE. IF THE BLENDING CONTAINER IS WARM TO
TOUCH, ALLOW IT TO COOL BEFORE CAREFULLY OPENING POINTED
AWAY FROM YOUR BODY TO AVOID INJURY.
After blending ingredients, allow the contents to settle and release any
pressure that may have built up during the extraction process by slowly
unscrewing the container from the blade assembly. Have the container
pointed away from you in case there is any built-up pressure.
After the initial and each subsequent 1-minute blending cycle, allow the
Power Base to shut off completely and wait at least 60 seconds before
starting another cycle.
IMPORTANT SAFEGUARDS • Do not run for more than 3 consecutive 1-minute intervals to prevent the
contents from overheating. Allow ingredients to settle for 2-3 minutes after
the third extraction cycle to prevent overheating and buildup of pressure.
DO NOT ALLOW BLENDED MIXTURES TO SIT IN A SEALED CONTAINER
FOR LONG PERIODS OF TIME! Sugar in fruits and vegetables can
ferment, causing pressure to build up and expand in the Blending
Container. If you do not plan to consume your blast immediately, remove
the Extractor Blade and use a Flip-Top Lid to close the container.
Remember to periodically release pressure that may have built up due to
fermentation by carefully unscrewing the lid. Built up pressure can cause
ingredients to burst and spray out when moved or opened.
EXTRACTOR BLADE SAFETY
EXTRACTOR BLADES ARE SHARP! HANDLE CAREFULLY. Use care while
handling the Extractor Blades, do not touch the Extractor Blade edges to
avoid injury.
AVOID CONTACT WITH MOVING PARTS! Keep hands and utensils out of
and away from the Extractor Blade while blending food to reduce the risk
of severe personal injury.
• TO REDUCE THE RISK OF PERSONAL INJURY OR PROPERTY DAMAGE,
make sure the Extractor Blade is securely screwed (hand tighten) onto
the Blending Container BEFORE placing it on the Power Base and
operating the NutriBullet®.
• NEVER STORE THE EXTRACTOR BLADE IN THE POWER BASE WITHOUT
A BLENDING CONTAINER ATTACHED.
• To prevent leakage and possible personal injury or property damage,
always make sure your EXTRACTOR BLADE is undamaged and the
GASKET is completely seated in the extractor blade before each use.
Leakage may cause residue buildup and damage to the Power Base.
Contact Customer Service for assistance if any component is damaged or
loose, or if you have any questions.
Once you have stopped your NutriBullet®, wait to remove the Blending
Container/Extractor Blade assembly from the Power Base until the motor
comes to a complete stop and the unit powers down completely. Taking
the container off the unit prior to complete power down can cause
damage to the Extractor Blade coupling or motor gear.
NEVER BLEND WITHOUT LIQUID AS DOING SO MAY DAMAGE THE
EXTRACTOR BLADE. The Cyclonic Action® of your NutriBullet® requires
the use of liquids to make NutriBlasts® and other nutritious beverages. The
NutriBullet® is not intended to be used as an ice crusher or without liquids.
DO NOT USE the Extractor Blade for grinding dry ingredients such as grains,
cereal, or coffee as this may damage the motor and the Extractor Blade.
• We recommend replacing your Extractor Blade every 6 months or as
needed for optimal performance.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NutriBullet PRO Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NutriBullet PRO Plus in the language / languages: English as an attachment in your email.

The manual is 3.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info