703174
15
Zoom out
Zoom in
Previous page
1/88
Next page
Milling
The Milling Blade is for turning dry ingredients into powders. Perfect for
milling oats, nuts and seeds.
1
Fill ingredients into the Short Cup.
2
Twist on the Milling Blade.
3
Place the Cup onto the Power Base.
Press down and twist to lock the motor on.
4
Mill your ingredients until you achieve the
desired consistency.
5
To turn off the NUTRIBULLET - simply twist in
the opposite direction (to the right) to release
the tabs and stop pressing down on the cup.
Once the power base stops completely, remove
the cup from the power base.
HOW IT WORKS
Extracting
1
Fill ingredients into the Tall or Short Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the Tall
Cup and hand tighten to make sure the
vessel has been sealed.
4
Press the vessel blade side-down onto the Power
Base. Press down and twist to extract for no longer
than 1 minute. If more extraction is needed, wait 1
minute, then repeat the extraction process in 1 minute
intervals up to 3 times as needed to achieve the desired
consistency. If more than 3 1-minute extractions are
needed, allow the power base to cool for 2-3 minutes
after the third extraction before beginning the next
round. You can see the extraction process happening.
Keep an eye on the consistency. Your NUTRIBLAST is
ready when it looks smooth and creamy!
5
To turn off the NUTRIBULLET - simply twist in the
opposite direction (to the right) to release the tabs and
stop pressing down on the cup. Once the power base
stops completely, remove the cup from the power base.
26 27
CAUTION: FRICTION FROM THE ROTATING BLADE WHEN EXTRACTING OR MILL-
ING CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL PRESSURE
IN THE SEALED VESSEL. IF THE VESSEL IS WARM TO TOUCH, ALLOW TO COOL
BEFORE CAREFULLY OPENING POINTED AWAY FROM YOUR BODY.
NUTRIBULLET,
NUTRIBULLET,
Fill ingredients into the Short Cup.
NUTRIBULLET,
Fill ingredients into the Short Cup.
NUTRIBULLET,
2
NUTRIBULLET,
2
intervals up to 3 times as needed to achieve the desired
NUTRIBULLET,
intervals up to 3 times as needed to achieve the desired
consistency. If more than 3 1-minute extractions are
NUTRIBULLET,
consistency. If more than 3 1-minute extractions are
needed, allow the power base to cool for 2-3 minutes
NUTRIBULLET,
needed, allow the power base to cool for 2-3 minutes
after the third extraction before beginning the next
NUTRIBULLET,
after the third extraction before beginning the next
round. You can see the extraction process happening.
NUTRIBULLET,
round. You can see the extraction process happening.
Keep an eye on the consistency. Your
NUTRIBULLET,
Keep an eye on the consistency. Your
NUTRIBLAST
NUTRIBULLET,
NUTRIBLAST
ready when it looks smooth and creamy!
NUTRIBULLET,
ready when it looks smooth and creamy!
NUTRIBULLET,
NUTRIBULLET,
NUTRIBULLET,
NUTRIBULLET,
NUTRIBULLET,
NUTRIBULLET,
LLC
The Milling Blade is for turning dry ingredients into powders. Perfect for
LLC
The Milling Blade is for turning dry ingredients into powders. Perfect for
milling oats, nuts and seeds.
LLC
milling oats, nuts and seeds.
Fill ingredients into the Short Cup.
LLC
Fill ingredients into the Short Cup.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NutriBullet 600 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NutriBullet 600 Series in the language / languages: English as an attachment in your email.

The manual is 9,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NutriBullet 600 Series

NutriBullet 600 Series User Manual - German - 48 pages

NutriBullet 600 Series User Manual - Dutch - 29 pages

NutriBullet 600 Series User Manual - French, Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info