Manual Nutool BT211N (page 24 of 92) (English, German, French, Italian, Polish, Portuguese, Spanish, Finnish)

549799

Zoom out

Zoom in

1/92

1. Description

1. Release button

2. Handle

3. On/Off switch for

mitre box saw mode

4. On/Off switch for

bench-type circular saw mode

5. Saw blade

6. Saw blade guard, hinged

7. Stop rail

8. Rotary table

9. Lower saw table

10. Lock screw for turntable

11. Scale

12. Table insert, bottom

13. Saw blade fixture

14. Lower saw blade cover

15. Locking nut

16. Saw table

17. Upper saw blade guard

18. Parallel stop

19. Hexagon wrench

20. Workpiece supports

21. Face wrench

22. Clamping screw

23. Retaining pin

24. Locking fork

25. Knurled screw for miter settings

26. Knurled screw

27. Stop rail

28. Lock screw for cutting width

29. Push stick

30. Splitter

31. Extractor socket

32. Allen screw

33. Recessed head screw

34. Table insert, top

35. Outer flange

36. Lock screw for workpiece support

2. Items supplied

� Cross cut and miter box saw with upper table

� Carbide-tipped saw blade

� Cross/parallel stop

� Push stick

� Workpiece support

� Face wrench, hexagon wrench

3. Proper use

The KGST 210/1 circular cross-cut and mitre box

saw with upper table is designed for making cross

cuts, longitudinal cuts and mitre cuts (using the

stops) in timber and plastic commensurate with the

machine’s size. It is not suitable for cutting fire wood.

A special jig is required to cut roundwood.

The machine is to be used only for its prescribed

purpose.

Any use other than that mentioned is considered to

be a case of misuse. The user/operator and not the

manufacturer shall be liable for any damage or injury

resulting from such cases of misuse. The machine is

to be operated only with suitable saw blades. It is

prohibited to use any type of cutting-off wheel.

To use the machine properly you must also observe

the safety regulations, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the machine have

to be acquainted with this manual and must be

informed about its potential hazards.

It is also imperative to observe the accident

prevention regulations in force in your area. The

same applies for the general rules of occupational

health and safety.

The manufacturer shall not be liable for any changes

made to the machine nor for any damage resulting

from such changes.

Even when the machine is used as prescribed it is

still impossible to eliminate certain residual risk

factors. The following hazards may arise in

connection with the machine’s construction and

design:

� Contact with the saw blade in the uncovered saw

zone.

� Reaching into the running saw blade (cut

injuries).

� Kick-back of workpieces and parts of workpieces

due to improper handling.

� Saw blade fracturing.

� Catapulting of faulty carbide tips from the saw

blade.

� Damage to hearing if essential ear-muffs are not

worn.

� Harmful emissions of wood dust when the

machine is used in closed rooms.

4. Important notes

Please read this manual carefully and pay attention

to the information provided. Use this manual to

familiarize yourself with the machine, its correct use

and safety regulations.

� Safety regulations

� Important: Whenever you use electric tools it is

imperative to take basic safety precautions in

order to reduce the risk of fire, electric shock and

personal injury. Essential safety precautions

include:

Anleitung KGST 210/1 19.09.2002 18:49 Uhr Seite 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nutool BT211N in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 7,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nutool BT211N Manual

Product: