This setting is used for emphasizing left or right
speaker balance.
Press “” or “” button to select Balance. Press “” or
“” button to change the level of the balance. Balance
level can be adjusted between -32 and + 32.
Headphone
Press “” or “” button to select Headphone. Press
“” button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press “” or “” button to select Volume. Press “
” button to increase headphone volume level. Press
“” button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Sound Mode
Press “” or “” button to select Sound Mode. Using
“” or “” button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press “” or “” button to select AVL. Press “” or
“” button to set the AVL as On or Off.
Store
Press “” or “” button to select Store. Press “”
or OK button to store the settings. “Stored...” will be
displayed on the screen.
Feature Menu
Sleep Timer
Press “” or “” button to select Sleep Timer. Use
“” or “” button to set the Sleep Timer.
The timer can be programmed between Off and 2
hours (120 minutes) in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press “” or “” button to select Child Lock.
Use “” or “” button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control. In this case the control panel
buttons will not work, except for the Standby/On
button. When Child Lock is activated you are able to
switch the TV into Standby mode with the Standby/
On button. To switch the TV on again, you need the
remote control.
Hence, if one of those buttons is pressed, Child Lock
is On will be displayed on the screen when the menu
screen is not visible.
Language
Press “” or “” button to select Language. Use “”
or “” button to select the Language.
Default Zoom
While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press “” or “” button to select Default Zoom. You
can set Default Zoomto 16:9, 4:3, Panoramic or
14:9 by pressing “” or “” button.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
By pressing “” or “” button, select Blue
Background. Press “” or “” button to set Blue
Background as On or Off.
Menu Background
Press “” or “” button to select Menu Background.
You can set menu background level by pressing
“” or “” button.
Power Save Mode
Use “” or “” button to select Power Save Mode.
Press “” or “” button to set Power Save Mode as
On or Off.
See the section, “Environmental Information” in
this manual for further information on Power Save
Mode.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
MB45_[GB]_3902UK_IDTV_BRONZE11_22920W_LED_POWER SAVE MODE_10068917_50168693.indd 21MB45_[GB]_3902UK_IDTV_BRONZE11_22920W_LED_POWER SAVE MODE_10068917_50168693.indd 2104.06.2010 17:15:0304.06.2010 17:15:03
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Nutech 22920 FHD at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Nutech 22920 FHD in the language / languages: English as an attachment in your email.
The manual is 3,7 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
