626288
16
Zoom out
Zoom in
Previous page
1/87
Next page
2827
EN
EN
The safety belt must go under the lock-off, not over the
lock-off. (21) -1
The safety belt must be locked into the buckle. (21) -2
The load leg must be installed correctly with green
indicator. (21) -3
5 Push the car seat down into the base (22), if the car
seat is secure, the car seat indicator shows green.
Pull up on the car seat to be sure it is securely latched
into the base.
6 To release the car seat, pull the car seat up while squeezing
the car eat release button.
(24)
Installation with ISOFIX System
1 Unfold the load leg from storage compartment. (18)
2 Fit the ISOFIX guides with the ISOFIX anchor points. (25)
The ISOFIX guides can protect the surface of the vehicle
seat from being torn. They can also guide the ISOFIX
connectors.
3 Rotate the ISOFIX connectors 180 degrees until they are
pointing in the direction of the ISOFIX guides.
(26)
4 Line up the ISOFIX connectors with the ISOFIX guides, and
then click both ISOFIX connectors into the ISOFIX anchor
points. (27)
Make sure that both ISOFIX connectors are securely
attached to their ISOFIX anchor points. There should
be two audible clicks and the colors of the indicators
on the both ISOFIX connectors should be completely
green. (27) -1
Check to make sure the base is securely installed by
pulling on the both ISOFIX connectors.
5 Please refer to step 2 in section 'a. Installation with
3-point-belt' for adjustment of load leg.
The completely assembled base is shown as (28)
The ISOFIX connectors must be attached and locked
onto the ISOFIX anchor points.
(28) -1
The load leg must be installed correctly with green
indicator. (28) -2
6 Please refer to step 5, 6 in section 'a. Installation with
3-point-belt' to use the infant car seat.
7 To remove the base, pull the base backwards while pressing
the buttons on the ISOFIX connectors.
(29)
Securing
child
Foam inside infant insert is present to ensure that harness
fits child properly. Infant insert must be used for children 0-6
months.
After the child is placed into the seat, check whether the
Shoulder Harness Straps are at proper height.
1 While pressing the adjustment button located at the front of
the infant car seat, pull completely the two Shoulder Harness
Straps of the infant car seat.
(30)
2 Unlock the buckle of the harnesses by pressing the red
button. (31)
3 Place the child into the infant car seat and lock the buckle.
(32)Please refer to. (33)
4 Tighten the shoulder harness straps by pulling the
adjustment webbing. (34)
Make sure the space between the child and the Shoulder
Harness Straps is about the thickness of one hand.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuna Pipa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuna Pipa in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info