768522
17
Zoom out
Zoom in
Previous page
1/86
Next page
1918 PIPA lite lx Instructions PIPA lite lx Instructions
EN
EN
Shoulder Belts
1 -
Tighten harness to fit snugly on child’s
shoulders. It is snug if you cannot pinch a fold in
the strap. (28)
2 - Harness straps must be at or just below
shoulders. (29)
3 - To adjust shoulder harness height, remove
child and loosen harness by pressing the
harness adjustment button (30)-1 while pulling
on the harness strap (30)-2 The harness
adjustment button is located inside the slot on
the seat pad.
4 - Open the buckle. Pull loose ends of harness
loop out through slots and place in correct
slot. (31)
DO NOT allow harness to pass over bars.
Repeat process for second shoulder harness
strap.
Product Use
Securing Child in Child Restraint
1 - Place child in Child Restraint in seated position.
(32)
2 - The child should be seated against both the
back and bottom of the seat with no gap
behind the child. DO NOT allow child to slouch.
(33)
Gently guide child’s arms through harness
loops.
3 - Place the child into the infant child restraint
and lock the buckle. (34)(35)(36)(37)
4 - Tighten harness by pulling on the adjuster
strap. Pull any excess harness webbing through
the buckle towards the child’s shoulder and
pull on the adjuster strap. This may need to be
repeated several times for proper fit. (37)
Verify that the harness is snug around the
child’s waist and shoulders.
Harness straps must be at or just below child’s
shoulders to avoid injury. If harness slots need
to be moved, see Shoulder Belts section.
Make sure that nothing interferes with the
harness. Make sure harness is snug around
child and lays flat. Serious injury or death could
occur to a child that is not secured properly.
If child is not secured properly, child could be
ejected in a sudden stop or crash, resulting in
serious injury or death.
Check that Child is Secure
Buckle is fastened.
Harness straps are not twisted.
Harness is snug – A snug harness cannot be
pinched, and should not allow any slack.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuna Pipa Lite LX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuna Pipa Lite LX in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info