Manual Nuna PIPA icon - PIPAFIX (page 12 of 71) (English, German, Dutch, French, Italian, Spanish)

626287

Zoom out

Zoom in

1/71

2019

Contents

of the box

Infant Child Restraint

Cold Weather Boot

Tools Needed: None

Handle

adjustment

1 The handle of the infant child restraint can be adjusted to 3

positions.

Rocking position. (5) -1

Baby chair position. (5) -2

Position for car, hand or stroller transportation. (5) -3

2 To adjust the handle positon, squeeze handle buttons on

both sides to release it. (6) -1

3 Rotate handle until it clicks into any of the 3 positions. (6) -2

Installation

with base

1 Unfold the load leg from storage compartment. (7)

2 Fit the ISOFIX guides with the ISOFIX anchor points. (8)

The ISOFIX guides can protect the surface of the vehicle

seat from being torn. They can also guide the ISOFIX

connectors.

3 Rotate the ISOFIX connectors 180 degrees until they are

pointing in the direction of the ISOFIX guides.

(9)

4 Line up the ISOFIX connectors with the ISOFIX guides, and

then click both ISOFIX connectors into the ISOFIX anchor

points. (10)

Make sure that both ISOFIX connectors are securely

attached to their ISOFIX anchor points. There should

be two audible clicks and the colors of the indicators

on the both ISOFIX connectors should be completely

green. (10) -1

Check to make sure the base is securely installed by

pulling on the both ISOFIX connectors.

5 After placing the base on the vehicle seat, extend the load

leg to floor

(11). When the load leg indicator shows green

means it is installed correctly, red means it is installed

incorrectly. (11)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuna PIPA icon - PIPAFIX in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuna PIPA icon - PIPAFIX Manual

Product: