768539
11
Zoom out
Zoom in
Previous page
1/205
Next page
109CARI next instruction CARI next instruction
EN
EN
5 - After placing the base on the vehicle seat, extend the load leg to floor (8).
When the load leg is installed correctly, the load leg indicator will show
green. Red will be shown when installed incorrectly. (8)-2
The load leg has multiple positions. When the load leg indicator shows
red this means the load leg is in the wrong position.
Make sure the load leg is in full contact with the vehicle floor pan.
Squeeze the load leg adjustment button, then shorten the load leg
upwards. (8)-1
The completely assembled base is shown as (9).
The ISOFIX connectors must be attached and locked onto the ISOFIX
anchor bars. (9)-1
The load leg must be installed correctly with green indicator. (9)-2
Attaching Carry Cot to the Base
1 - Pull up the canopy as illustrated while pressing the buttons on both
sides. (10)
2 - Check to make sure the handle is secure before placing the child in the
carry cot. (11)-1
Make sure that the handle is in the correct position of use before carrying
or lifting.
3 - Push the carry cot down onto the base (12), if the carry cot is secure, the
shell indicator will show green. (13)
Please check that the mesh at the bottom of the carrycot is fixed properly
before installing carry cot. (12)
Check that the carry cot is locked onto the base by pulling up on the
handle.
4 - Press the ISOFIX adjustment and push the base back until it comes in
contact with the vehicle seat back.
5 - To release the carry cot, squeeze the infant carrier release button on the
base (14)-1, then lift the carry cot up. (14)-2
When carry cot is installed on base, the incorrect installation is shown in
(16). The correct installation is shown in (15)
Uninstalling the Base
1 - To remove the base, press the secondary lock button (17)-1 first followed
by the button (17)-2 on the ISOFIX connectors before removing the base
from the vehicle seat. (17)
2 - For transporting, press ISOFIX adjustment button and move the ISOFIX
connectors back into the storage position. (18)
Securing Child
1 - Open the carry cot cover. (19)
2 - Press the harness adjustment button while pulling the both shoulder
harnesses of the enhanced child restraint to the desired length. (20)
3 - Unlock the buckle by pressing the red button. (21)
We recommend using the infant insert while the baby is under 60cm and
until they outgrow the insert.
Remove the side wing of the infant insert when the baby's shoulders no
longer fit comfortably. (22)
4 - Place child into the enhanced child restraint and engage the buckle.
(23)(24)
5 - Tighten the shoulder harness straps by pulling the adjustment webbing.
(25)
Make sure the space between the child and the shoulder harness straps
is about the thickness of one hand.
6 - Attach the cover to the carry cot with the zippers on either sides. (26)
7 - To use the dream drape™, secure it to the two sides of carry cot with
magnets. (27)
8 - The canopy window can be opened for ventilation. (28)
Detach & Assemble Soft Goods
Follow steps (29) - (42) to detach soft goods.
To re-attach the soft goods please repeat the above steps in the reverse
step.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuna CariNext at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuna CariNext in the language / languages: All languages as an attachment in your email.

The manual is 9,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info