Manual Numatic TTV 678-300T (page 19 of 32) (English)

564480

Zoom out

Zoom in

1/32

ALWAYS ENSURE THAT THE MACHINE IS

SWITCHED OFF PRIOR TO CHARGING.

! !

The battery meter displays the charge level of the batteries; when fully charged,

all meter lights are illuminated (see Fig.36).

As the machine is used and the batteries are discharged, the meter lights will go out from

right to left.

If the battery-charge level is allowed to discharge to the point that only the red light remains

illuminated, the operator must consider charging the machine.

If the battery-charge level is allowed to discharge to the point that only one red light remains

illuminated (and begins to ash), all cleaning functions will automatically be disabled and

the operator should drive the machine straight to a suitable charge point.

The large capacity gel batteries are sealed for life and are totally maintenance free.

The on-board charger automatically monitors the charging process and will switch off

when the batteries are fully charged.

The machine charging point is located under the top tank (see Fig.37).

Insert the charging lead required for your country (see start up pack) into the charging point

and connect to a suitable power supply (see Fig.38).

Once mains power is connected the red charging indicator will illuminate.

To ensure a full charge, the machine should be left for a period of 8-12hrs.

Once fully charged, disconnect the charging lead from both the power supply and

the machine and lower the tank back into position as described earlier (see Fig.1a, page 6).

Fig.36a

Fig.36

Machine Charging

Fig.37

Fig.38

Fig.39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV 678-300T in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV 678-300T Manual

Product: