Manual Numatic TTV 678-300T (page 7 of 32) (English)

564480

Zoom out

Zoom in

1/32

Contents:

1 x Operator Manual

2 x Battery charging lead

2 x Keys

4 x 40 amp fuses (1 x spare)

2 x Side pod skirts

1 x Brake disengage key

1 x Maxi fuse-puller

Fig.1

Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.

When inserting the rst fuse you may notice a spark, this is normal.

Lift top tank assembly to reveal battery compartment.

Always lift between points as illustrated to ensure personal safety (Fig.1a).

Fit battery fuses (contained in start-up pack) into the battery fuse holders as illustrated (Fig.2).

Remove transit block from pallet (g 2a).

Insert key (Fig.3) into ignition and turn quarter-turn clockwise to the ‘On’ position.

Ensure that the forward/reverse switch is set to forward (Fig.4).

Depress accelerator pedal with right foot and slowly drive machine off of the pallet

using the ramp provided (Fig.5).

Note: The seat is tted with a pressure sensor that disables the machine until an operator

is seated.

When the machine is removed and in a safe position, turn key back to the off position (Fig.6).

Fig.6

Please read before commencing any operation.

After the removal of all the packaging, carefully open and check the contents of the start up pack (Fig.1).

Quick Set Up Guide

Fig.2a

Fig.1a

Fig.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV 678-300T in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV 678-300T Manual

Product: