Manual Numatic TTV - 5565- 200T (page 13 of 28) (English)

564479

Zoom out

Zoom in

1/28

Fig.20

Fig.22

After preparing the oor (see previous section), we are now ready to set the controls to suit the cleaning conditions.

Before any settings can be applied, ensure the brush deck is lowered (see Fig.23).

Move the oor-tool lever (see Fig.20), to it’s lower position (see Fig.21).

Note: The machine will still reverse with the oor-tool in the lowered position, this could possibly damage the blades.

Raise the oor-tool before selecting reverse.

The control for lowering the brush deck can be found to the rear right of the machine (Fig.22).

Lower the brush deck by moving the left hand release lever to the upper position (see Fig.23).

Note: If the brush width has not been set, see ‘Setting the width adjustment’ on page 10 before proceeding.

Fig.23

Fig.21

Machine Operation

Lowering the oor-tool

Lowering the brush deck

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV - 5565- 200T in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV - 5565- 200T Manual

Product: