Manual Numatic TTB 516 (page 15 of 24) (English, French)

564476

Zoom out

Zoom in

1/24

233969 / 01/13 (A20)

Regular Maintenance

ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED

PRIOR TO ANY MAINTENANCE OPERATION

! !

After use, empty waste-water tank using

emptying hose and ush-out with clean

water.

Remove the two hoses to disconnect the separator from the

machine (Fig 28).

Lift off the separator. The separator has a sealing-rubber

which should be examined at every clean-down (Fig 29).

Rinse using clean water.

NOTE:

Avoid over tightening the clean water draining cap.

The TTB 516 has been designed with ease of use in mind, this included easy stripping-down and cleaning.

Remove the two lters clipped into the separator and ush with clean water (Fig 30)(Fig 30a).

Replace by tting the rear of the lter rst then clipping the front to lock in place (Fig 31) (Fig 32).

Disconnect and remove the

battery before proceeding with

tank removal (Fig 33).

Once emptied the top

waste-water tank can simply be

lifted off. (Fig 33a).

The clean-water tank can be drained via the yellow cap tted

to the left hand side of the machine. The cap has a rubber

seal and might require a spanner to remove. (Fig 34).

Fig 28

Fig 29

Fig 30 Fig 31

Fig 32

Fig 33

Fig 34

Fig 30a

Fig 33a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTB 516 in the language / languages: English, French as an attachment in your email.

The manual is 4,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTB 516 Manual

Product: