Manual Numatic TTB-1840 (page 40 of 52) (English, German, Dutch, French)

473152

Zoom out

Zoom in

1/52

233970 (Page 40) 10/11 (A13)

Battery Care

Removing the battery

Unplug the battery from the machine using the red

connection handle (Fig 48).

The battery can then be lifted from the machine for

storage or charging (Fig 49).

Recharge the machine fully after its last use.

Do not leave the machine in a discharged state.

Under abnormal use;

i.e. leaving the machine without charging for a period of time, we advise that you disconnect the battery from

the machine.

If the machine will be standing unused for a period of 30 days or more, then batteries must be fully charged

Note.

Batteries should be recharged every three months.

Charge fully the day before you start using the machine again.

The battery pack comes with a 40 amp safety

fuse tted (Fig 50).

Remove the six screws holding the battery pack

together (Fig 51).

Split the pack and replace the fuse using

(208526) Numatic approved part (Fig 52).

Fig 48

Fig 49

Fig 50

Fig 52

Removing the battery pack fuse

Fig 51

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTB-1840 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTB-1840 Manual

Product: