Manual Numatic TTB-1840 (page 36 of 52) (English, German, Dutch, French)

473152

Zoom out

Zoom in

1/52

233970 (Page 36) 10/11 (A13)

Regular Maintenance

Once the clean-water tank has been emptied, the tank can be

removed.

Firstly detach the water feed pipe from the tap, this can be

done by pushing the red tap clip in whilst pulling off the pipe.

(Fig 35).

Removing the Clean Water Tank

The black suction hose from the

oor-tool simply pulls off the oor tool

(Fig 36).

Inside the clean water tank is a lter,

located below the clean water inlet

(Fig 36a)

Clean all hoses and lters by ushing

with clean water.

Replacing the Clean Water Tank

Fit the suction hose to the oor tool (Fig 37) and pass through

the hole in the clean water tank (Fig 37a).

Place the tank onto the machine base.

The water feed pipe simply

pushes onto the tap. (Fig 38a).

NOTE:

Ensure the water feed pipe locates in the channel

moulded into the base of the tank (Fig 38).

Replacing the Waste Water Tank

Place the suction hose as shown

(Fig 39).

Place the tank onto the machine

(Fig 39a).

Ret the separator and reconnect the vacuum and suction

hose (Fig 40).

Fig 35 Fig 36

Fig 38

Fig 39

Fig 40

Fig 38a

Fig 36a

Fig 37a

Fig 37

Fig 39a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTB-1840 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTB-1840 Manual

Product: