Manual Numark TTXUSB turntable (page 6 of 48) (English, German, French, Italian, Spanish)

618180

Zoom out

Zoom in

1/48

Tonearm Assembly

1. Counterweight/Ring and S-Weight:

The Counterweight is used to balance the head

shell and cartridge assembly so that the proper

amount of stylus pressure is applied to the

record. The S-Weight should be used in most

cases when the S-Shaped tube is used. It is

not needed for the straight arm and can be

stored below the counterweight in the top

cabinet while not in use.

2. Height Adjust Ring:

Turning this ring counter-clockwise raises the

tonearm up to 6mm to accommodate for

different slipmat thicknesses. This ring can not

be adjusted unless the Height Lock Lever (3) is

unlocked.

3. Height Lock Lever:

Turning this lever towards the direction of the

arrow (clockwise) unlocks the Height Adjust

Ring (2) so that the tonearm height can be

adjusted.

4. Anti-Skate Adjustment:

This knob is used to compensate for inward

tracking forces. See Tonearm Setup for more

details on its settings.

5. Secondary Tube Lock Collar:

This collar is used to secure the tonearm tubes

(straight or s-shaped) to the tonearm

assembly.

6. Arm Clip:

This specially designed arm clip secures the

tone arm while it is being transported or not in

use.

7. Tonearm Cueing System:

This feature allows the tone arm to be

positioned at a certain point above the record

and slowly engaged. When the lift lever is in

the up position the tone arm should rest on the

armrest. When the lift lever is lowered, the

tone arm is slowly lowered until the stylus is

resting on the record.

8. Tone Arm Lock Nut:

This aluminum nut is used to secure the head

shell and cartridge assembly to the tone arm

tube. See cartridge setup for more details.

WARNING: DO NOT OVERTIGHTEN LOCK COLLAR (5) OR THE LOCK NUT (8)!

CONNECTING ANYTHING OTHER THAN NUMARK ARMS TO THIS COLLAR MAY DAMAGE THE

INTERNAL PIN HEIGHTS OF THE CONTACTS!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark TTXUSB turntable in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark TTXUSB turntable Manual

Product: