618186

Numark Stereo iO Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
3
AUDIO SETUP
WINDOWS 7:
1. Use the included cable to connect the STEREO|iO to
your computer.
2. Go to Start Menu f Control Panel f Hardware and
Sound f Sound.
3. Click the Playback tab and select USB Audio Codec* as
the default device.
4. Click the Recording tab and select USB Audio Codec*
as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-
channel, 16-bit, 44100 Hz (CD Quality) as the default
format.
7. Uncheck both boxes under Exclusive Mode.
8. Click the Levels tab and set the slider to "4."
9. Click OK to close the Properties window.
10. Click OK to close the Sound control panel.
WINDOWS VISTA:
1. Use the included cable to connect the STEREO|iO to your computer.
2. Go to Start Menu f Control Panel f Sound. (If you don't see Sound, select Switch to Classic View, and the
Sound Control Panel should become available.)
3. Click the Playback tab and select USB Audio Codec* as the default device.
4. Click the Recording tab and select USB Audio Codec* as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as the default
format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
WINDOWS XP:
1. Use the included cable to connect the STEREO|iO to your computer.
2. Go to Start Menu f Control Panel f Sounds and Audio Devices.
3. Click the Audio tab.
4. Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.
5. Click OK.
MAC:
1. Use the included cable to connect the STEREO|iO to your computer.
2. Go to Applications f Utilities f Audio MIDI Setup.
3. In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input and Default
Output.
4. Close the window.
* If you have other USB audio devices connected
to your computer, which may have identical
names, you may need to try selecting each one
until the STEREO
|
i
O
is reco
g
nized.
If you experience too much latency after adjusting
your software latency settings, we recommend the
free ASIO4ALL (Audio Stream Input/Output) driver
for PC at www.asio4all.com. ASIO drivers
generally perform better and with lower latency
since they create a more efficient communication
between audio devices and software.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark Stereo iO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark Stereo iO in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info