Manual Numark NS7 II (page 12 of 64) (English, German, French, Italian, Spanish)

618134

Zoom out

Zoom in

1/64

Effects Controls

49. FX 1, FX 2, FX 3: These buttons have different functions on each Deck depending on the

current FX Mode.

• Single-FX Mode: FX 1 activates or deactivates the effect; FX 2 activates or deactivates

the first effect parameter; FX 3 activates or deactivates the second effect parameter.

Press and hold Shift and press FX 1 to select the desired effect.

• Multi-FX Mode: The buttons activate or deactivate the first, second, and third effects in

the effects chain, respectively. Press and hold Shift and press one of the buttons to

select the effect for that point in the effects chain.

50. FX 1 Knob, FX 2 Knob, FX 3 Knob: These knobs have different functions on each Deck

depending on the current FX Mode.

• Single-FX Mode: the FX 1 Knob controls the "wet-dry" balance of the effect; the FX 2

Knob controls the first effect parameter; the FX 3 Knob controls the second effect

parameter. When Touch Mode is activated, touch the FX 1 Knob to activate its effect,

and release the knob to deactivate it.

• Multi-FX Mode: The knobs control the "wet-dry" balance of the first, second, and third

effects in the effects chain, respectively. When Touch Mode is activated, touch a knob to

activate its effect, and release the knob to deactivate it.

51. Beat / Mode: Tap this button repeatedly at the desired tempo to set the rate of the effects'

low-frequency oscillators (LFOs). Press and hold this button to reset Beat Multiplier to the

Deck's BPM. Press and hold Shift and then press this button to switch between Single-FX

Mode and Multi-FX Mode.

52. Beat Knob: Turn this knob to set the Time Division for the selected effects.

53. FX Assign: Use these buttons to apply Effect A and/or B to the corresponding channel. You

can apply Effect A and/or B to the entire Program Mix by using the FX Send buttons below

the Master Volume knob. (Each effect can be applied to any or all of the four channels and/or

the Program Mix.)

54. Channel Filter: Turn this knob to adjust the filter on the corresponding channel. The type of

filter it adjusts will depend on the Filter Mode button.

55. Filter Mode: Press this button to change the Filter Mode, which affects the Channel Filter

knobs:

• Off: When this button is off, the Channel Filter knob will apply and adjust a low-pass

filter to the corresponding channel when turned counter-clockwise or a high-pass filter

when turned clockwise.

• Filter-Roll Mode: Press this button once to activate Filter-Roll Mode (the button will light

solid red). The Channel Filter knob will apply and adjust a low-pass filter to the

corresponding channel when turned counter-clockwise or a high-pass filter when turned

clockwise. In addition, it will apply a Loop Roll to the filter and will decrease in length as

the knob moves further away from the center position. Press this button once to

deactivate Filter-Roll Mode.

• Filter-FX Mode: Press and hold Shift and then press this button to activate Filter-FX

Mode (the button will flash red). The Channel Filter knob will apply and adjust a low-

pass filter to the corresponding channel when turned counter-clockwise or a high-pass

filter when turned clockwise. In addition, it will adjust Parameter 1 of the effects applied

to that channel as the knob moves further away from the center position. Press this

button once to deactivate Filter-FX Mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark NS7 II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark NS7 II Manual

Product: