618121

Numark NS7 3 Manual

12
Zoom out
Zoom in
Previous page
1/120
Next page
12
Track Controls
33. Strip Search™: The length of this strip represents the length of the entire track. Place your
finger on a point along this sensor to jump to that point in the track. (If you want to scroll
through a track, we recommend using your computer rather than running your finger along
the strip.)
34. Slip / Clear: When using the software’s Beat Grid, press and hold this button and move
the platter to “slip” (i.e., shift or slide) the entire Beat Grid to the left or right.
Press and hold Shift and then press this button to delete the entire Beat Grid.
Important: Your track must have a set Beat Grid for the Slip / Clear button to work.
35. Adjust / Set: Press and hold this button and move the platter to “warp” the entire Beat Grid.
Press and hold Shift and then press this button to set a Beat Marker at the Audio
Playhead’s current location.
Important: Your track must have a set Beat Grid for the Adjust feature to work. Also, using
the Adjust feature will change the track’s BPM.
36. Slip Mode / Motor Off: Press this button to enable or disable Slip Mode. In Slip Mode,
you can jump to Hot Cue Points, trigger Loop Rolls, or use the platters, while the track’s
timeline continues. In other words, when you stop the action, the track will resume normal
playback from where it would have been if you had never done anything (i.e., as if the track
had been playing forward the whole time).
Press and hold Shift and press this button to activate or deactivate the corresponding
platter’s motor. This will not affect the track’s playback.
Pitch Controls
37. Tap: Tap this button at the same tempo as the track to help the software detect a more
accurate BPM reading.
38. Range / Master Tempo: Press this to adjust the range of the Pitch Fader to ±8%, ±16%,
and ±50%.
Press and hold Shift and then press this button to “lock” the track’s pitch to its original
key. The track’s tempo will remain at the speed designated by the Pitch Fader.
39. Takeover LEDs: When you select the other Deck with the Deck Select switch, the position
of the NS7III’s Pitch Fader may not match the Pitch setting for that Deck in the software.
Slowly move the Pitch Fader in the direction indicated by the Takeover LED arrow until it
turns off. At this point, the Pitch Fader matches the Pitch setting in the software and can
control it again.
40. Pitch Fader: Controls the track’s playback speed. An LED next to the fader will light up
when set at 0%.
41. Pitch Bend ( + / – ): Press or hold down either of these buttons to temporarily adjust the
track’s playback speed. When released, the track playback will return to the speed
designated by the Pitch Fader.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark NS7 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark NS7 3 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 12,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info