618152
8
Zoom out
Zoom in
Previous page
1/52
Next page
8
MULTI-MODE TRIGGER BUTTONS
By pressing the circular MODE button, you can choose the desired mode for the three trigger buttons shown above. There are
three modes available:
LOOP-2: In this mode the three TRIGGER BUTTONS act as another set of loop buttons that
behave in the same way as the buttons above them. This gives you the ability to set two
completely separate sets of loop points. For more information on looping, see the
following chapter.
HOT CUE: This mode will allow you to set up to three "hot cue points". These are similar to regular
cue points, except that when the TRIGGER BUTTONS are pressed, the unit will instantly
jump to the defined point and begin playing.
To define a hot cue point, make sure you are in hot cue mode by pressing the circular
MODE button until "Mode:Hot CUE" is displayed on the lower portion of the screen.
Press REC to arm recording, then press the desired TRIGGER BUTTON. Whatever
point you are at on the CD at the moment you press the TRIGGER BUTTON is the point
that will be recorded to the TRIGGER BUTTON. To instantly start playing from your hot
cue point just press the same TRIGGER BUTTON again.
SAMPLE: The third mode is sample mode. Sample mode allows you to record an audio sample up
to 5 seconds long, on each of the 3 TRIGGER BUTTON.
To record a sample, first make sure you are in sample mode by pressing the round
MODE button until the display shows "Mode:SAMPLES". Next, press and release REC
to arm recording. Then, when you press one of the three TRIGGER BUTTONS, the unit
will begin recording until you either press that TRIGGER BUTTON again to stop
recording or you run out of sample space.
To play back your sample, just press the appropriate TRIGGER BUTTON. Buttons with
samples assigned to them will be lit while unused buttons will be dark.
There are also three playback options you can choose for each of the three sample
TRIGGER BUTTONS. To choose a mode, hold the REC button, then while continuing to
hold REC, hold the desired TRIGGER BUTTON and turn the PARAMETER knob to
select the option you want to change. To modify the selected option, press down and
release the PARAMETER knob then turn the knob to the desired setting. Press down on
the PARAMETER knob to lock in that option choice.
The three playback options are:
Sample Insert (On, Off): Determines whether the sample will override the currently
playing audio source or if it will be mixed together with the currently playing
audio source. With 'On' selected, the sample will override the playing audio,
while with 'Off' selected, the sample will be mixed in with the playing audio.
Sample Reverse (On, Off): When on, this option will play the sample in reverse.
Sample Volume (0-100): This setting controls the volume of the sample when
played back.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark NDX900 Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark NDX900 Controller in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info