618126

Numark NDX500 Manual

6
Zoom out
Zoom in
Previous page
1/36
Next page
6
17. Pitch Bend –/+: Press either of these buttons to temporarily raise (+) or lower (–) the
pitch and tempo of the music up to 4% from the current pitch setting.
18. Tap: Tap this button to the beat of the music to enter a BPM manually. Press and hold
this button for 2 seconds to prompt NDX500 to detect a BPM automatically.
19. Master Tempo: Press this to activate or deactivate Master Tempo, which locks the
musical key of the track to its original key (as if it were playing with 0% pitch adjustment).
You can then adjust the tempo of the track without affecting its key or pitch.
20. Time: Press this button to cycle through the available Time Modes, which determine how
time is shown in the display: elapsed time (Elapsed), remaining time on the track
(Remain), and total remaining time on an entire CD (Remaining).
Press and hold this button and turn the Track Knob to scroll through the ID3 tags of a
selected file with available ID3 information. You can choose to view the Title, Album,
Artist, or no ID3 tags.
21. Single: Press this button to switch between the available Play Modes: Auto-Cue
(playback will stop at the end of each track) or Continuous (Continue) (tracks will play
one after another without interruption).
Press and hold this button and turn the Track Knob to adjust the remote start settings
(as long as the NDX500's Remote Start Connector is connected to the appropriate input
of a remote-start-compatible mixer). See the Remote Start Connector description to
learn about the available settings.
22. Prog: This button helps you create a program, a sequence of tracks to play continuously:
• To add a track to the program, turn the Track Knob to select it, and then press
and hold Prog and then press Rec. P–## will flash on the LCD (## indicates what
number that track occupies in the program: P–01, P–02, etc.). Repeat this process
to add more songs to the program. If a program is stored,
Prog will be shown in the
display.
• To play the program, press Prog once. The currently selected track in the program
will be shown in the display, and the program's total number of tracks will be shown
in the upper-left corner as P##. Turn the Track Knob to select the current track,
press the Track Knob to load the track, and then press Play to start playing the
Program from that track.
• To exit the program, press and hold Prog, and then press Folder. (If a track is
currently playing, it will continue playing.)
• To delete the program, press and hold Prog, and then press Eject. When asked if
you want to delete the program, turn the Track Knob to select Yes or No, and then
press the Track Knob to confirm your choice. (If a track is currently playing, it will
continue playing.)
23. Rec: Press this button, and then press one of the Hot Cue buttons to record a hot cue
point at the desired location in the track.
24. Hot Cue: Press one of these buttons to return its corresponding hot cue point and
continue playback. Only lit Hot Cue buttons have a recorded hot cue point.
To record a hot cue point, press Rec, and then press one of the Hot Cue buttons at the
desired location in the track. You can also overwrite these hot cue points in the same
way. Hot cue points will not be deleted when you load a new track.
25. Loop In: Press this button during playback to set a Loop In point, the start point of a
loop. The cue point becomes this Loop In point.
26. Loop Out: Press this button to set a Loop Out point, the end point of a loop. The loop will
begin playing immediately. To deactivate a loop, press Loop Out again.
27. Reloop: Press this button to jump immediately to the Loop In point and start playing the
loop at that point.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark NDX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark NDX500 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info