618156
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
TOP PANEL FEATURES
1. EJECT Press this button to eject
the CD. If a CD is currently playing,
this button will have no effect. This
unit is designed to play commercially
available CDs, properly burned and
finalized CD-Rs, and MP3 CDs. Due
to variances on the specification of
certain CD burners and CDs, some
homemade CDs may not play
properly. We recommend burning
CDs at the minimum speed possible
for the best performance.
2. USB – Connect a USB thumb drive
(with a FAT16 or FAT32 file system)
with MP3s here. To view the
contents of the device, press the
SOURCE button so "USB" is
selected.
3. CD / USB – Press this button to
select whether the NDX400 will view
and play tracks from an inserted CD
or a connected USB device. An LED
will indicate the currently selected
source.
4. FOLDER – Press this button to
toggle between Folder View and File
View. In Folder View, you can use
the TRACK KNOB to scroll through
all the available folders. When you
have selected a folder, press the
FOLDER button to enter File View –
the first file shown will be the first
MP3 available in that folder. To
return to Folder View, press the FOLDER button again.
Note: In both views, you are not restricted to viewing only folders or files on a single "directory level."
Each view is simply a list of all available folder or files. This function provides a faster way of
navigating your files, allowing you to jump to different groups of files within a folder but without
requiring you to enter/exit multiple directory levels.
5. TRACK KNOB – Turn this knob to select a track to play. Press and turn this knob to skip through your
track listing 10 tracks at a time.
6. PLAY / PAUSE – Plays or pauses the track. Pausing the track will create a cue point at that location
(which can be adjusted with the JOG WHEEL in Search Mode).
7. CUE During playback, pressing CUE will return to the most recent point where playback was started
and will pause the track. Holding down CUE will start playback from this point, and releasing CUE will
cause it to return to that point and will pause the track. Also, if the track is paused, you can use the
JOG WHEEL to locate a new cue point.
8. SCRATCH – Activates or deactivates Scratch Mode. While activated, rotating the JOG WHEEL
creates a 'scratch' effect. The button will be red when Scratch Mode is active. (Note: This feature is
not optimal for searching through long audio passages. For longer searches, activate the SEARCH
function.)
9. SEARCH – Pressing this button allows you to use the JOG WHEEL to rapidly scan through the music.
The button will be red when Search Mode is active.
10. REVERSE – Press this button to reverse playback of the track (the button will be lit). Press it again to
return to normal playback.
11. BRAKE – Press this button to activate braking (the button will be lit). When braking is activated,
pausing the track will cause playback to slow down before stopping, simulating the effect of stopping
the motor of a turntable. Adjust the braking time by holding BRAKE and turning the JOG WHEEL.
1
2
3
4
5
6
8
9
10
11
12
13
14
14 14
15
16 17
18
19
20
21
25
26
22
23
23
24
7
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark NDX400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark NDX400 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info