618157

Numark NDX200 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
4
TOP PANEL FEATURES
1. EJECT – Pressing will open or close the
disc tray on the transport. This unit is
designed to play commercially available
CDs and properly burned and finalized
CD-Rs. Due to variances on the
specification of certain CD burners and
CDs, some homemade CDs may not play
properly. We recommend burning CDs at
the minimum speed possible for the best
performance.
2. PLAY / PAUSE – Plays or pauses the
track. Pausing the track will create a cue
point at that location (which can be
adjusted with the JOG WHEEL in Search
Mode).
3. CUE – During playback, pressing CUE will
return to the most recent point where
playback was started and will pause the
track. Holding down CUE will start
playback from this point, and releasing
CUE will cause it to return to that point and
will pause the track. Also, if the track is
paused, you can use the JOG WHEEL to
locate a new cue point.
4. SEARCH – Pressing this button allows
you to use the JOG WHEEL to rapidly
scan through the music. The LED indicator
will be red when Search Mode is active.
(Note: If the JOG WHEEL is not used for
8 seconds, Search Mode will be
deactivated.)
5. JOG WHEEL – The jog wheel serves
many functions depending on its current
mode.
a) If a track is not playing, the JOG
WHEEL will search slowly through a
track's frames. To set a new cue
point, rotate the JOG WHEEL then
begin playback when you have determined the proper position. Press CUE to return to that cue point.
b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG WHEEL
clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is a useful tool for beat-
matching.
c) When the SEARCH button has been activated, rotating the JOG WHEEL will scan rapidly through the track.
6. TRACK KNOB – Turn this knob to select a track to play. Press this knob to skip through your track listing 10 tracks at a
time.
7. PROGRAM – This button helps you create a program – a sequence of tracks to play continuously. To create a
program, press PROGRAM when the CD player is paused. To enter a track into the program, use the TRACK KNOB to
select the desired track then press PROGRAM to enter it. Repeat this process for each track you want to enter (in the
order you want them to play). When you have finished, press PLAY / PAUSE to start playing the program. The tracks
will play in the order you entered them, and "PROGRAM" will be shown on the LCD. To cancel your program as it is
playing, press and hold PROGRAM for 2 seconds so "PROGRAM" disappears from the LCD.
8. SINGLE – Press this button to toggle between Single Play (the deck will stop at the end of each track) or Continuous
Play (the entire disc will be played without interruption).
9. TIME – Switches the time display between elapsed playing time, remaining time on the track, and total remaining time
on the entire CD.
10. LOOP IN – Sets a new cue point or the start point of a loop (a "Loop In" point) during playback.
11. LOOP OUT – Sets the end point of a loop (a "Loop Out" point) and starts playing the loop. While playing a loop, press
LOOP OUT to release it from the loop and continue normal playback.
12. RELOOP – Plays the track immediately from the beginning of a loop (and reactivates the loop).
13. PITCH – Adjusts the range of the PITCH FADER (±4%, 8%, and 16%). The current range will be indicated on the LCD
and by different LEDs.
14. PITCH FADER – The pitch can be changed by pressing the PITCH button so a PITCH LED is lit, then moving the sliding
fader. The pitch will not be changed if the PITCH LED is off.
15. PITCH BEND -/+ – You can use these two pitch bend buttons to temporarily adjust the pitch and tempo of the music up
to -/+ 16% from the current pitch setting.
16. LCD – Indicates all the functions, as they are occurring, with the CD.
1
6
2
3
5
4
7
10 11 12
13
14
15
16
9
8
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark NDX200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark NDX200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info